This product is end of life or currently not available.
Ports & interfaces | |
DC-in jack | |
Console port | RJ-45 |
Combo SFP ports quantity | 2 |
Installed SFP modules quantity | 2 |
Basic switching RJ-45 Ethernet ports type | Fast Ethernet (10/100) |
Basic switching RJ-45 Ethernet ports quantity | 24 |
Weight & dimensions | |
Weight | 3.3 kg |
Height | 44 mm |
Width | 440 mm |
Depth | 238 mm |
Energy management | |
Power consumption (typical) | 220 W |
Redundant power supply (RPS) support | |
Input current | 10 |
AC input frequency | 50/60 |
AC input voltage | 100-240 |
Operational conditions | |
Operating relative humidity (H-H) | 10 - 90% |
Storage temperature (T-T) | -40 - 70 °C |
Operating temperature (T-T) | 0 - 40 °C |
Storage relative humidity (H-H) | 10 - 95% |
Protocols | |
Management protocols | SNMP v1, v2c, v3, RMON |
Networking | |
Full duplex | |
Networking standards | IEEE 802.3,IEEE 802.3ab,IEEE 802.3at,IEEE 802.3u |
Flow control support | |
Port mirroring | |
Link aggregation | |
Broadcast storm control | |
Rate limiting | |
DHCP client | |
IGMP snooping | |
Auto MDI/MDI-X | |
Spanning tree protocol | |
VLAN support | |
Routing entries | 32 |
10G support | |
Data transmission | |
MAC address table | 8192 entries |
Switching capacity | 8.8 Gbit/s |
Jumbo frames support | |
Number of VLANs | 256 |
Latency (10-100 Mbps) | 5 µs |
Throughput | 6.6 Mpps |
Security | |
Security algorithms | 802.1x RADIUS |
Access Control List (ACL) | |
SSH/SSL support | |
Management features | |
MIB support | Y |
Switch layer | L3 |
Quality of Service (QoS) support | |
Multicast support | |
Web-based management | |
System event log | |
Switch type | Managed network switch |
Packaging content | |
User guide | |
Design | |
Certification | RoHS, WEEE |
Rack mounting | |
Safety | IEC 60950-1; EN 60950-1; UL 60950-1 2, CSA C22.2 No. 60950-1-07 2 |
Form factor | 1U |
LED indicators | |
Product colour | Black, Grey |
Power over Ethernet (PoE) | |
Power over Ethernet (PoE) | |
Power over Ethernet plus (PoE+) ports quantity | 24 |
Total Power over Ethernet (PoE) budget | 180 W |
Performance | |
Processor frequency | 500 MHz |
Internal memory | 128 MB |
Flash memory | 32 MB |
Packet buffer memory | 0.5 MB |
EAN | 0887758142899 |
Warranty | 1 year |
Source: Icecat.biz |
HP 1910 switches are advanced smart managed fixed-configuration Gigabit and Fast Ethernet switches designed for small businesses in an easy-to-administer solution. The series has 8 gigabit models and 5 Fast Ethernet models.
The gigabit models are : 8-, 16-, 24-, and 48-port 10/100/1000 non-PoE models; and two 8-port and two 24-port 10/100/1000 PoE models. Gigabit models have additional true Gigabit SFP ports for fiber connectivity.
The Fast Ethernet models are : 8-. 24- and 48- 10/100 non-PoE models and 8-, 24- 10/100 PoE+ models.
The Fast Ethernet models come with additional 2 combo uplink ports . All HP 1910 models support rack mounting or desktop operation.
Customizable features include basic layer 2 features like VLANs and link aggregation as well as advanced features such as Layer 3 static routing, IPv6, ACLs and Spanning Tree Protocols. HP 1910 switches come with a lifetime warranty covering the unit, fans, and power supplies.
Features
Management
- Simple Web management: allows for easy management of the switch- even by nontechnical users- through an intuitive Web GUI; http and secure http (https) is supported
- Single IP management: enables management of up to four HP 1910 devices using a single Web interface; simplifies management of multiple devices
- Secure Web GUI: provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
- SNMPv1, v2c, and v3: facilitates management of the switch, as the device can be discovered and monitored from an SNMP management station
- Complete session logging: provides detailed information for problem identification and resolution
Quality of Service (QoS)
- Broadcast control: allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic
- Rate limiting: sets per-port ingress enforced maximums and per-port, per-queue minimums
- Traffic prioritization: provides time-sensitive packets (like VoIP and video) with priority over other traffic based on DSCP or IEEE 802.1p classification; packets are mapped to four hardware queues for more effective throughput
Connectivity
- IPv6: IPv6 host: enables switches to be managed and deployed at the IPv6 network's edge. IPv6 routing: supports IPv6 static routes. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface, preventing traffic flooding. IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic.
- Auto-MDI/MDIX: adjusts automatically for straight-through or crossover cables on all 10/100/1000 ports
- IEEE 802.3X flow control: provides a flow throttling mechanism propagated through the network to prevent packet loss at a congested node
- IEEE 802.3af Power over Ethernet (PoE) ready: provides up to 15.4 W per port to power standards-compliant IP phones, wireless LAN access points, Web cameras, and more (all PoE models)
- IEEE 802.3at Power over Ethernet (PoE+): provides up to 30 W per port which allows support of the latest PoE+-capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments. (Note: applies to all PoE models, except the two 24G-PoE models which support a pre-standard implementation of PoE+)
Security
- Advanced access control lists (ACLs): enables network traffic filtering and enhances network control using MAC- and IP-based ACLs; time-based ACLs allow for greater flexibility with managing network access
- Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
- IEEE 802.1X and RADIUS network logins: controls port-based access for authentication and accountability
- Automatic VLAN assignment: assigns users automatically to the appropriate VLAN based on their identity, location and time of day
- STP BPDU port protection: blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
Estimated delivery: Unknown
Today: Closed (Good Friday)
Estimated delivery: Unknown
Today: Closed (Good Friday)
Estimated delivery: Unknown
Today: Closed (Good Friday)
Estimated delivery: Unknown
Today: Closed (Good Friday)
Estimated delivery: Unknown
Today: Closed
Estimated delivery: Unknown
Today: Closed (Good Friday)
Estimated delivery: Unknown
Today: Closed (Good Friday)