logo Multitronic Oy
Myllärinkatu 10
65100 Vaasa
Web: www.multitronic.fi
Telephone: 06 - 319 77 00
E-mail: info@multitronic.fi

ALLIED Media Converter 10/100TX over VDSL Coax

Manufacturer: ALLIED TELESIS
ID: AT-MC606-60
Product unavailable
This product is end of life or currently not available.
Specifications
Description
Store availability
Delivery
Price development
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity1
Weight & dimensions
Weight300 g
Energy management
Power consumption (typical)4 W
Power connectorDC-in jack
Operational conditions
Operating altitude0 - 3048 m
Storage temperature (T-T)-25 - 70 °C
Operating temperature (T-T)32 - 104 °F
Relative humidity5 - 95%
Networking
Full duplexcheckmark
Auto MDI/MDI-Xcheckmark
10G supportcross
Data transmission
Supported data transfer rates10/100 Mbps
Management features
Switch typeManaged
Optical fiber
Transmission distance (max)2 km
Other features
Dimensions (WxDxH)95 x 109 x 25 mm
Power supply typeAC/DC
Networking featuresFast Ethernet
Input voltage100 - 240, 12 V
Connectivity technologyWired
Data transfer rate100 Mbit/s
Input frequency50/60 Hz
Power LEDcheckmark
Design
CertificationUL 1950, FCC B, CSA, EN 55022 B, EN 60950 (TUV), EN 50082-1
LED indicatorsLAN, Link
Product colourGrey
Power over Ethernet (PoE)
Power over Ethernet (PoE)cross
Performance
Mean time between failures (MTBF)700000 h
Noise level9 dB
EAN0767035191829
Warranty2 years
Source: Icecat.biz

Extended Ethernet Operation
Used as a pair, the AT-MC606 provides up to 100Mbps of data transfer over a Coax 50 or 75
ohm cable via a BNC connector. Standard Ethernet operation is preserved end to-end, retaining VLAN tags, and Ethernet MAC information across the link, while higher layer protocols are passed transparently. Cable length of up to 2km can be supported by the AT-MC606.

Standalone and Rack-mount
The AT-MC606 provider unit is available as a compact standalone unit for installation at the central office, or alternatively, it can be rackmounted in the standard AT-MCR12 chassis from Allied Telesis, capable of housing up to twelve units in one compact chassis with a redundant power supply, simplifying wiring and minimizing space requirements.

Plug and Play Operation
Simply connect to the RJ-45 Ethernet port and the unit will automatically auto-sense and configure for 10T or 10/100TX, as well as full or half-duplex Ethernet operation.

Applications
The AT-MC606 is a perfect fit for the IP surveillance market. Many already installed analog cameras use a coax cable to connect cameras back to the control center or encoder. (At the encoder, the analog signal is converted to digital for backhaul transmission.)
When these cameras need replacing – they are now increasingly being replaced by digital cameras. Digital cameras do not allow connectivity over coax cables, so either the camera and cable needs to be upgraded, or the existing cable can be used if an AT-MC606 is installed at either end of the cable, saving the cost of running all new cabling.
The AT-MC606 can also be used in legacy 10Base2 (ThinNet) style applications, only if two AT-MC606 devices are connected, and provided they are at the end of the cable runs.

No price development information for this product.

Multitronic warehouse store: 0 pcs
Estimated delivery: Unknown
Multitronic | JNT Pietarsaari: 0 pcs
Estimated delivery: Unknown
Multitronic Seinäjoki: 0 pcs
Estimated delivery: Unknown
Multitronic | iTronic Jyväskylä: 0 pcs
Estimated delivery: Unknown
Multitronic | iTronic Lappeenranta: 0 pcs
Estimated delivery: Unknown
Multitronic Mariehamn: 0 pcs
Estimated delivery: Unknown
iTronic Vaasa: 0 pcs
Estimated delivery: Unknown

Main page

Menu

Cart

Search