Projecta Ten Elpro L El 4 00x254 Pearle

Projecta Tensioned Elpro Large Electrol

Projection screen for medium to large venue applications with a tab-tensioned projection surface for a perfectly flat viewing area. Available in widths from 3.5 to 4.5 metres.

- Flexible mounting brackets are standard with one metre of lateral adjustment from each end cap for easy positioning.
- For optimal connectivity, the Tensioned Elpro Large Electrol can also be operated using the Easy Install accessories.
- Easy Serviceability System; once installed, the motor and screen surface remain accessible making adjustments and carrying out maintenance possible.
- Robust steel case with high speed, low noise motor.
- The motor is equipped with electric locks to prevent inadvertent unrolling and features thermal overload cut-off.
- The case and the projection screen surface can made to exactly the right size and the case is available in any colour for optimal integration into any interior.

- Shorten or reduce the width of the projection screen surface.
- Shorten the case and shorten or reduce the width of the projection screen surface.
- Paint the case, slat bar and plastic components in a different RAL colour. When the screen needs to match a specific colour scheme, we can paint the case in any colour specified.
- Reverse installation of the surface so that the projection side is located to the rear. Specify this method when the projection screen surface needs to exit the case reversely because the normal screen path is obstructed by an obstacle or because the case is to be mounted to a beam. Note that there are two reverse installation options. The projection screen fabric can either be configured to exit the case at the front or the mounting brackets can be mounted in reverse. Indicate clearly what your requirement is so that Projecta can produce the screen required.
- Extension of the projection screen surface. If required and technically feasible, Projecta installs a longer projection surface in the case.
- Extension of the projection screen surface with additional black drop. When the projection screen surface needs to be extended and a larger black border is required at the top or bottom, we adapt the surface to your specifications.
- Motor positioned on the right rather than on the left. When the motor and connection box need to be positioned on the right to make connection easier, we adapt the screen to suit.
- The Projecta Screen Designer assists designing the projection screen that exactly meets the needs of the installation. Use this application to generate a PDF file with the specifications of the customised screen. E-mail or fax the drawing to Projecta to request a quotation.