Данный товар более не продается или в настоящий момент не может быть приобретен.
Вес и размеры | |
Вес | 10 g |
Высота | 12,5 mm |
Ширина | 95 mm |
Глубина | 190 mm |
Данные об упаковке | |
Количество | 1 |
Свойства | |
Совместимость | bitSnaps |
Тип управления | Беспроводной |
Тип продукта | Remote control receiver |
Рекомендуемый возраст (мин) | 14 yr(s) |
EAN | 810876020947 |
Source: Icecat.biz |
You can control your Bits wirelessly with the inseparable wireless receiver & wireless transmitter pair. The wireless receiver decodes the information that’s sent to it from the wireless transmitter and sends it out of the bitSnap to create an action (such as when your RC car moves in the direction you sent it in).
How It Works
The three bitSnaps (labeled 1, 2, and 3) on the both the transmitter and receiver correspond to each other. For example, if you send a signal through bitSnap 1 on the transmitter circuit, the output connected to bitSnap 1 on the receiver circuit will send out that same signal. The wireless Bits are also able to communicate on five different transmission channels, like a walkie talkie. To change the channel, press the button on the board and choose a,b,c,d or e. Both the wireless transmitter and receiver need to be set to the same channel in order to talk to each other. The five transmission channels allow for multiple transmitter/receiver pairs to be used in the same vicinity. Multiple wireless receivers can be used with a single wireless transmitter if they’re on the same transmission channel. However, only one wireless transmitter can be used within the same proximity of another wireless transmitter.
Срок доставки: Неизвестно
Сегодня: 10:00 - 18:00
Срок доставки: Неизвестно
Сегодня: 09:00 - 17:00
Срок доставки: Неизвестно
Сегодня: 10:00 - 18:00
Срок доставки: Неизвестно
Сегодня: 10:00 - 17:00
Срок доставки: Неизвестно
Сегодня: 10:00 - 18:00
Срок доставки: Неизвестно
Сегодня: 10:00 - 17:00
Срок доставки: Неизвестно
Сегодня: 10:00 - 18:00