Порты и интерфейсы | |
Количество портов USB 2.0 | 1 |
Консольный порт | RJ-45 |
Тип RJ-45 Ethernet портов для основного подключения | 10G Ethernet (100/1000/10000) |
Количество RJ-45 Ethernet портов для основного подключения | 1 |
Количество слотов для QSFP+ модулей | 32 |
Вес и размеры | |
Вес | 9 kg |
Высота | 44 mm |
Ширина | 440 mm |
Глубина | 406 mm |
Энергопитание | |
Количество блоков питания | 2 |
Поддержка резервного блока питания (РБП) | |
Частота входящего переменного тока | 50 - 60 Hz |
Входящее напряжение сети | 100 - 240 V |
Максимальное потребление энергии | 406 W |
Блок питания в комплекте | |
Внешние условия | |
Диапазон относительной влажности при эксплуатации | 5 - 95% |
Диапазон рабочих температур | 0 - 45 °C |
Тепловыделение | 1385,27 BTU/ч |
Протоколы | |
Протоколы управления | SNMP v1/v2c/v3 |
Сеть | |
Стандарты сети | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1Qau, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3x |
Поддержка управления потоками | |
Объединение каналов | |
Скорость передачи данных Ethernet LAN | 25000,100000 Мбит/с |
Протокол Spanning tree | |
Поддержка VLAN | |
Передача данных | |
Размер адресной таблицы | 288000 записей |
Коммутационная способность | 256000 Gbit/s |
Поддержка Jumbo Frames | |
Скорость передачи | 1428 Mpps |
Пакетная буферная память | 12 MB |
джамбо кадры | 9000 |
Безопасность | |
Алгоритмы шифрования данных | SSH |
Список контроля доступа (ACL) | |
Отслеживание сетевого трафика IGMP | |
правила списка контроля доступа (ACL) | 1000 |
Входной список управления доступом (ACL) | 16000 |
Выходной список управления доступом (ACL) | 16000 |
Характеристики управления | |
Уровень свича | L2/L3 |
Поддержка Quality of Service (QoS) | |
Тип свича | Управляемый |
Дизайн | |
Монтаж в стойку | |
Формат | 1U |
Цвет товара | Черный |
Количество вентиляторов | 5 вентилятор(ы) |
Power over Ethernet (PoE) | |
Питание по Ethernet (PoE) | |
Характеристики | |
Среднее время наработки на отказ | 85937 h |
Уровень шума | 69,8 dB |
Поддержка многоадресной передачи | |
EAN | 790069457081 |
Source: Icecat.biz |
High Availability and Reliability
The 5000 Series switches feature a modular fan and power supply design for a high availability architecture. The hot-swappable design means that fans and power supplies can be replaced without affecting switch operation. Load sharing enables both power supplies to evenly distribute load to increase reliability and lifetime. Meanwhile, 1+1 redundancy minimizes downtime in case of a single power supply failure.
Open Networking
The 5000 Series switches support open networking, providing IT professionals with innovative third-party operating systems and software options. This lowers costs by separating software from hardware and increases network agility and flexibility. With support for standards-based tools and standards-based applications, open networking simplifies scalability and future-proofs the network.
Flexibility and Versatility
The 5000 Series switches are available in a variety of high-capacity interface combinations, including 10G, 25G, 40G, and 100G ports to accommodate the scale and requirements of data centers. Open Network Install Environment (ONIE) support means the switches can be easily integrated in existing network ecosystems using a variety of supported third-party Network Operating Systems (NOSs) for optimal compatibility.
Cost-Efficient with Dedicated Support
Compared to traditional switches, the 5000 Series offer a more cost-efficient solution through a lower initial purchasing cost combined with a reduced long term Total Cost of Ownership (TCO). The 5000 Series switches feature front-to-back and back-to-front airflow which optimizes air circulation inside the rack and facilitates the building of energy-efficient data centers by separating the hot and cold aisles. The switches also feature built-in smart fans; internal heat sensors monitor and detect temperature changes, and react accordingly by utilizing different fan speeds for different temperatures, optimizing power consumption.
Data Center and Virtualization Features
Data Center Bridging (DCB) is an essential set of enhancements to Ethernet for networking in data center environments. The D-Link OS for the 5000 Series switches supports several core components of Data Center Bridging (DCB) such as IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Qau, and VXLAN. IEEE 802.1Qbb (Priority-based Flow Control) provides flow control on specific priority levels to ensure there is no data loss during network congestion.
Complete Layer 2/3 Functionality
The 5000 Series switches feature a complete L2 and L3 feature set to meet the demands of data center applications. Layer 2 features include L2 switching, L2 multicast, advanced Quality of Service (QoS), and robust security features. Meanwhile, the 5000 Series offers advanced L3 routing for enterprise integration, including OSPF, BGP, Graceful Restart, Bidirectional Forwarding Detection (BFD), and L3 multicast.
Срок доставки: Неизвестно
Сегодня: Закрыт (Великая пятница)
Срок доставки: Неизвестно
Сегодня: Закрыт (Великая пятница)
Срок доставки: Неизвестно
Сегодня: Закрыт (Великая пятница)
Срок доставки: Неизвестно
Сегодня: Закрыт (Великая пятница)
Срок доставки: Неизвестно
Сегодня: Закрыт
Срок доставки: Неизвестно
Сегодня: Закрыт (Великая пятница)
Срок доставки: Неизвестно
Сегодня: Закрыт (Великая пятница)
Время доставки: Неизвестно
Время доставки: Неизвестно
Время доставки: Неизвестно
Время доставки: Неизвестно
Время доставки: Неизвестно
Время доставки: Неизвестно