Ports & interfaces | |
USB 2.0 ports quantity | 1 |
Console port | RJ-45 |
Basic switching RJ-45 Ethernet ports type | 10G Ethernet (100/1000/10000) |
Basic switching RJ-45 Ethernet ports quantity | 1 |
QSFP+ module slots quantity | 32 |
Weight & dimensions | |
Weight | 9 kg |
Height | 44 mm |
Width | 440 mm |
Depth | 406 mm |
Energy management | |
Number of power supply units | 2 |
Redundant power supply (RPS) support | |
AC input frequency | 50 - 60 Hz |
AC input voltage | 100 - 240 V |
Power consumption (max) | 406 W |
Power supply included | |
Operational conditions | |
Operating relative humidity (H-H) | 5 - 95% |
Operating temperature (T-T) | 0 - 45 °C |
Heat dissipation | 1385.27 BTU/h |
Protocols | |
Management protocols | SNMP v1/v2c/v3 |
Networking | |
Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1Qau, IEEE 802.1Qaz, IEEE 802.1Qbb, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3x |
Flow control support | |
Link aggregation | |
Ethernet LAN data rates | 25000,100000 Mbit/s |
Spanning tree protocol | |
VLAN support | |
Data transmission | |
MAC address table | 288000 entries |
Switching capacity | 256000 Gbit/s |
Jumbo frames support | |
Forwarding rate | 1428 Mpps |
Packet buffer memory | 12 MB |
Jumbo frames | 9000 |
Security | |
Security algorithms | SSH |
Access Control List (ACL) | |
IGMP snooping | |
Access Control List (ACL) rules | 1000 |
Access Control List (ACL) ingress | 16000 |
Access Control List (ACL) egress | 16000 |
Management features | |
Switch layer | L2/L3 |
Quality of Service (QoS) support | |
Switch type | Managed |
Design | |
Rack mounting | |
Form factor | 1U |
Product colour | Black |
Number of fans | 5 fan(s) |
Power over Ethernet (PoE) | |
Power over Ethernet (PoE) | |
Performance | |
Mean time between failures (MTBF) | 85937 h |
Noise level | 69.8 dB |
Multicast features | |
Multicast support | |
EAN | 790069457081 |
Source: Icecat.biz |
High Availability and Reliability
The 5000 Series switches feature a modular fan and power supply design for a high availability architecture. The hot-swappable design means that fans and power supplies can be replaced without affecting switch operation. Load sharing enables both power supplies to evenly distribute load to increase reliability and lifetime. Meanwhile, 1+1 redundancy minimizes downtime in case of a single power supply failure.
Open Networking
The 5000 Series switches support open networking, providing IT professionals with innovative third-party operating systems and software options. This lowers costs by separating software from hardware and increases network agility and flexibility. With support for standards-based tools and standards-based applications, open networking simplifies scalability and future-proofs the network.
Flexibility and Versatility
The 5000 Series switches are available in a variety of high-capacity interface combinations, including 10G, 25G, 40G, and 100G ports to accommodate the scale and requirements of data centers. Open Network Install Environment (ONIE) support means the switches can be easily integrated in existing network ecosystems using a variety of supported third-party Network Operating Systems (NOSs) for optimal compatibility.
Cost-Efficient with Dedicated Support
Compared to traditional switches, the 5000 Series offer a more cost-efficient solution through a lower initial purchasing cost combined with a reduced long term Total Cost of Ownership (TCO). The 5000 Series switches feature front-to-back and back-to-front airflow which optimizes air circulation inside the rack and facilitates the building of energy-efficient data centers by separating the hot and cold aisles. The switches also feature built-in smart fans; internal heat sensors monitor and detect temperature changes, and react accordingly by utilizing different fan speeds for different temperatures, optimizing power consumption.
Data Center and Virtualization Features
Data Center Bridging (DCB) is an essential set of enhancements to Ethernet for networking in data center environments. The D-Link OS for the 5000 Series switches supports several core components of Data Center Bridging (DCB) such as IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Qau, and VXLAN. IEEE 802.1Qbb (Priority-based Flow Control) provides flow control on specific priority levels to ensure there is no data loss during network congestion.
Complete Layer 2/3 Functionality
The 5000 Series switches feature a complete L2 and L3 feature set to meet the demands of data center applications. Layer 2 features include L2 switching, L2 multicast, advanced Quality of Service (QoS), and robust security features. Meanwhile, the 5000 Series offers advanced L3 routing for enterprise integration, including OSPF, BGP, Graceful Restart, Bidirectional Forwarding Detection (BFD), and L3 multicast.
Estimated delivery: Unknown
Today: 10:00 - 18:00
Estimated delivery: Unknown
Today: 09:00 - 17:00
Estimated delivery: Unknown
Today: 10:00 - 18:00
Estimated delivery: Unknown
Today: 10:00 - 17:00
Estimated delivery: Unknown
Today: 10:00 - 18:00
Estimated delivery: Unknown
Today: 10:00 - 18:00
Estimated delivery: Unknown
Today: 10:00 - 18:00
Estimated delivery time: Unknown
Estimated delivery time: Unknown
Estimated delivery time: Unknown
Estimated delivery time: Unknown
Estimated delivery time: Unknown
Estimated delivery time: Unknown