Товар не доступен
Данный товар более не продается или в настоящий момент не может быть приобретен.
Данный товар более не продается или в настоящий момент не может быть приобретен.
Характеристики
Описание
Наличие в магазинах
Доставка
Динамика цен
| Данные об упаковке | |
| Тип упаковки | Подвесная коробка |
| Содержимое упаковки | |
| Количество сверл | 1 шт |
| Свойства | |
| Цвет товара | Черный |
| Длина | 90 mm |
| Назначение | Дрель |
| Подходит для материалов | Твёрдая древесина, Мягкая древесина |
| Диаметр сверла | 1 cm |
| Диаметр хвостовика | 8 mm |
| Форма хвостовика | Цилиндрический хвостовик |
| Стандарт DIN | 7483 G |
| тип сверла | Сверло Форстнера |
| EAN | 3165140857901 |
| Source: Icecat.biz | |
Forstner Bit
For drills/drivers
Forstner Bit has an excellent lifespan for drilling accurate-fit holes
- The tooth-edge design creates less friction and heat for increased durability
- A short centring tip with two main and one periphery (toothed-edge) cutting edges enable smooth splinter-free drilling
- Cylindrical shank compatible with three-jaw drill chucks.
Forstner Bit has an excellent lifespan for drilling accurate-fit holes
- A short centring tip with two main and one periphery (toothed-edge) cutting edges enable smooth splinter-free drilling
- Large chip-free zones for optimised chip removal and fast drilling accuracy
- 3-sided shank prevents spinning in the chuck. Manufactured to DIN 7483G, 50 HRC (min) cutter hardness
The Forstner Bit's 3-sided shank prevents spinning in the chuck. It is manufactured to DIN 7483G, cutter hardness is 50 HRC minimum.
It is intended for use with all drills (drill drivers, drill stands) with a 10-mm chuck.
For drills/drivers
Forstner Bit has an excellent lifespan for drilling accurate-fit holes
- The tooth-edge design creates less friction and heat for increased durability
- A short centring tip with two main and one periphery (toothed-edge) cutting edges enable smooth splinter-free drilling
- Cylindrical shank compatible with three-jaw drill chucks.
Forstner Bit has an excellent lifespan for drilling accurate-fit holes
- A short centring tip with two main and one periphery (toothed-edge) cutting edges enable smooth splinter-free drilling
- Large chip-free zones for optimised chip removal and fast drilling accuracy
- 3-sided shank prevents spinning in the chuck. Manufactured to DIN 7483G, 50 HRC (min) cutter hardness
The Forstner Bit's 3-sided shank prevents spinning in the chuck. It is manufactured to DIN 7483G, cutter hardness is 50 HRC minimum.
It is intended for use with all drills (drill drivers, drill stands) with a 10-mm chuck.
Multitronic Vaasa: 0 шт
Срок доставки: Нет информации о доставке
Срок доставки: Нет информации о доставке
Сегодня: 10:00 - 18:00
Multitronic Pietarsaari: 0 шт
Срок доставки: Нет информации о доставке
Срок доставки: Нет информации о доставке
Сегодня: 09:00 - 17:00
Multitronic Jyväskylä: 0 шт
Срок доставки: Нет информации о доставке
Срок доставки: Нет информации о доставке
Сегодня: 10:00 - 17:00
Multitronic Lappeenranta: 0 шт
Срок доставки: Нет информации о доставке
Срок доставки: Нет информации о доставке
Сегодня: 10:00 - 18:00
Multitronic Mariehamn: 0 шт
Срок доставки: Нет информации о доставке
Срок доставки: Нет информации о доставке
Сегодня: 10:00 - 17:00
The above technical details are for reference only and may change without notice. We reserve the right to correct printing errors and use illustrations for guidance. Some text may be auto-generated or machine-translated, which could lead to inaccuracies.