Produkten är inte tillgänglig
Produkten har utgått från sortimentet eller är inte tillgänglig för tillfället.
Produkten har utgått från sortimentet eller är inte tillgänglig för tillfället.
Produktspecifikation
Välj en eller flera funktioner för att söka efter produkter med samma specifikationer.
Produktspecifikation
Beskrivning
På lager i butiker
Leverans
Prisutveckling
| Processor | |
| Processorfrekvens | 400 MHz |
| Processor | Intel Quark SoC X1000 |
| Processortillverkare | Intel |
| Processorlitografi | 32 nm |
| Processorsockel | 478 |
| 64-bitars bearbetning |  |
| Processorkärnor | 1 |
| Processortrådar | 1 |
| CPU konfiguration (max) | 1 |
| Värmeavledningseffekt (TDP) | 12,5 W |
| Processorcache | 16 KB |
| Styrkretsens modell | Intel® Quark |
| Processor med ECC-stöd | |
| Minne | |
| Typ av internminne | DDR3 |
| Flashminne | 8 MB |
| Typ av minneskort | MicroSD (TransFlash), MicroSDHC |
| Maximalt internminne | 0,256 GB |
| ECC | |
| Minneskapacitet | 32 bit |
| Antalet DIMM-platser | 0 |
| Minne klockhastighet | 800 MHz |
| Minnesbandbredd (max) | 2,5 GB/s |
| Högsta minneskortskapacitet | 32 GB |
| Minneskanaler | Enkel kanal |
| Flashminnestyp | Norsk |
| SRAM (Static Random Access Memory) | 512 KB |
| EEPROM (Electrically Erasable Programmable Read-Only Memory) | 8 KB |
| Anslutningar | |
| Seriella portar | 1 |
| Nätverksansluten (Ethernet) |  |
| Strömförsörjning via Ethernet (PoE) stöd | |
| Wi-Fi | |
| Typ av ethernet-gränssnitt | Snabb Ethernet |
| USB-version | 2.0 |
| Ljudportstyp | I2S |
| Serieport via intern header | |
| Antal USB-portar | 3 |
| Vikt & dimension | |
| Bredd | 72 mm |
| Djup | 123,8 mm |
| Processorns förpackningsstorlek | 15 x 15 mm |
| Strömtillförsel | |
| Likströmsdriftspänning | 7 - 15 V |
| Programvara | |
| Windows-operativsystem som stöds | |
| Linux operativsystem som stöds | |
| Expansionsplatser | |
| PCI Express x1 kortplatser | 1 |
| PCI-version | 2.0 |
| PCI Express x1 (Gen 2.x)-kortplatser | 1 |
| PCI Express-databanor | x1 |
| Högsta antal PCI Express-platser | 1 |
| Stöd för PCI | PCI Express |
| Mini PCI Express-kortplats (fullängd) | 1 |
| PCI Express CEM revision | 2.0 |
| Övriga egenskaper | |
| Strömförsörjning via Ethernet | 12 V |
| Minnestyper som stöds | DDR3 |
| PCI Express-kortplatser version | 2.0 |
| Mac-operativsystem som stöds | |
| Physical Address Extension (PAE) | 32 bit |
| Inbäddade alternativ | |
| Förpackningsstorlek | 15 x 15 mm |
| FSB:er som stöds | NA |
| Status | Discontinued |
| Lanseringsdatum | Q2'14 |
| ARK ID | 83137 |
| ECCN (Export Control Classification Number) | 4A994 |
| CCATS (Commodity Classification Automated Tracking System) | NA |
| Processor inkluderad | Intel® Quark™ SoC X1000 (16K Cache, 400 MHz) |
| Processor specialfunktioner | |
| Intel® Stöldskydd Teknik (Intel® AT) | |
| Intel® Snabb Memory Access | |
| Intel® Flex minnesåtkomst | |
| Intel® AES nya instruktioner (Intel® AES-NI) | |
| Intel® Virtualization Technology (Intel® VT) | |
| Intel® Trusted Execution Technology | |
| Intel® AC'97 teknik | |
| Intel® klient Initierat Remote Access (CIRA) teknik | |
| Intel® Matrix Storage Technology (Intel® MST) | |
| Intel® Remote PC Assist Technology (RPAT) | |
| Intel® Tyst System Technology (QST) | |
| Intel® Quick Resume Technology | |
| Intel® Rapid Storage Technology | |
| Intel HD Audio-teknik | |
| Intel® Small Business Advantage (Intel® SBA) | |
| Intel® Virtualization Technology for Directed I/O (VT-d) | |
| Intel Virtualization Technology (VT-x) | |
| Intel® Remote Wake Technology (Intel® RWT) | |
| Intel® vPro ™ plattformsberättigande | |
| Egenskaper | |
| Formfaktor | Arduino |
| Trusted Platform Module (TPM) | |
| FSB-paritet | |
| Back-to-BIOS-knappen | |
| Alternativ för låghalogen finns tillgängliga | |
| Utökad livslängd Program (XLP) | |
| Antal QPI länkar | 0 |
| Logistikdata | |
| Harmonized System (HS)-kod | 8471500150 |
| EAN | 5032037068703 |
| Garanti | 3 år |
| Source: Icecat.biz | |
Compatible with the Arduino software development environment. In addition to Arduino hardware and software compatibility, the board has several PC industry standard I/O ports and features to expand capabilities beyond the Arduino shield ecosystem.
What will you make?
The Intel® Galileo Gen 2 board is the first in a family of Arduino-certified development and prototyping boards based on Intel® architecture and specifically designed for makers, students, educators, and DIY electronics enthusiasts. Providing users with a fully open source hardware and software development environment, the Intel Galileo Gen 2 board complements and extends the Arduino line of products to deliver more advanced compute functionality to those already familiar with Arduino prototyping tools. The Intel Galileo Gen 2 development board is designed to be hardware-, software-, and pin-compatible with a wide range of Arduino Uno R3 shields and additionally allows users to incorporate Linux firmware calls in their Arduino sketch programming.
- Intel® Quark™ SoC X1000 application processor, a 32-bit, single-core, single-thread, Intel® Pentium® processor instruction set architecture (ISA)-compatible, operating at speeds up to 400 MHz.
- Support for a wide range of industry standard I/O interfaces, including a full-sized mini-PCI Express slot, 100 Mb Ethernet port, microSD* slot, USB host port, and USB client port.
- 256 MB DDR3, 512 kb embedded SRAM, 8 MB NOR Flash, and 8 kb EEPROM standard on the board, plus support for microSD card up to 32 GB.
- Hardware and pin compatibility with a wide range of Arduino Uno R3 shields.
- Programmable through the Arduino integrated development environment (IDE) that is supported on Microsoft Windows, Mac OS, and Linux host operating systems.
- Support for Yocto 1.4 Poky Linux release.
Whats new with the Intel® Galileo Gen 2 board
- 6-pin 3.3V USB TTL UART header replaces 3.5 mm jack RS-232 console port for Linux debug. New 6-pin connector mates with standard FTDI USB serial cable (TTL-232R-3V3) and popular USB-to-Serial breakout boards. 12 GPIOs now fully native for greater speed and improved drive strength.
- 12-bit pulse-width modulation (PWM) for more precise control of servos and smoother response.
- Console UART1 can be redirected to Arduino headers in sketches, eliminating the need for soft-serial in many cases.
- 12V power-over-Ethernet (PoE) capable (PoE module installation required).
- Power regulation system changed to accept power supplies from 7V to 15V.
What will you make?
The Intel® Galileo Gen 2 board is the first in a family of Arduino-certified development and prototyping boards based on Intel® architecture and specifically designed for makers, students, educators, and DIY electronics enthusiasts. Providing users with a fully open source hardware and software development environment, the Intel Galileo Gen 2 board complements and extends the Arduino line of products to deliver more advanced compute functionality to those already familiar with Arduino prototyping tools. The Intel Galileo Gen 2 development board is designed to be hardware-, software-, and pin-compatible with a wide range of Arduino Uno R3 shields and additionally allows users to incorporate Linux firmware calls in their Arduino sketch programming.
- Intel® Quark™ SoC X1000 application processor, a 32-bit, single-core, single-thread, Intel® Pentium® processor instruction set architecture (ISA)-compatible, operating at speeds up to 400 MHz.
- Support for a wide range of industry standard I/O interfaces, including a full-sized mini-PCI Express slot, 100 Mb Ethernet port, microSD* slot, USB host port, and USB client port.
- 256 MB DDR3, 512 kb embedded SRAM, 8 MB NOR Flash, and 8 kb EEPROM standard on the board, plus support for microSD card up to 32 GB.
- Hardware and pin compatibility with a wide range of Arduino Uno R3 shields.
- Programmable through the Arduino integrated development environment (IDE) that is supported on Microsoft Windows, Mac OS, and Linux host operating systems.
- Support for Yocto 1.4 Poky Linux release.
Whats new with the Intel® Galileo Gen 2 board
- 6-pin 3.3V USB TTL UART header replaces 3.5 mm jack RS-232 console port for Linux debug. New 6-pin connector mates with standard FTDI USB serial cable (TTL-232R-3V3) and popular USB-to-Serial breakout boards. 12 GPIOs now fully native for greater speed and improved drive strength.
- 12-bit pulse-width modulation (PWM) for more precise control of servos and smoother response.
- Console UART1 can be redirected to Arduino headers in sketches, eliminating the need for soft-serial in many cases.
- 12V power-over-Ethernet (PoE) capable (PoE module installation required).
- Power regulation system changed to accept power supplies from 7V to 15V.
Multitronic Vasa: 0 st
Beräknad leverans: Ingen leverans information
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 18:00
Multitronic Jakobstad: 0 st
Beräknad leverans: Ingen leverans information
Beräknad leverans: Ingen leverans information
Idag: 09:00 - 17:00
Multitronic Jyväskylä: 0 st
Beräknad leverans: Ingen leverans information
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 17:00
Multitronic Villmanstrand: 0 st
Beräknad leverans: Ingen leverans information
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 18:00
Multitronic Mariehamn: 0 st
Beräknad leverans: Ingen leverans information
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 18:00
De tekniska uppgifterna ovan är endast avsedda som referens och kan ändras. Vi förbehåller oss rätten att korrigera tryckfel och att använda illustrationer som vägledning. Viss text kan vara autogenererad eller maskinöversatt, vilket kan leda till felaktigheter.