logo Multitronic Oy
Mjölnaregatan 10
65100 Vasa
Web: www.multitronic.fi
Telefon: 06 - 319 77 00
E-post: info@multitronic.fi

Projecta Ten Des RF El 320x229 Pearle

Tillverkare: PROJECTA
ID: 10103058
Produkten är inte tillgänglig
Produkten har utgått från sortimentet eller är inte tillgänglig för tillfället.
Produktspecifikation
Beskrivning
På lager i butiker
Leverans
Prisutveckling
Vikt & dimension
Vikt38 kg
Fall L13,69 m
Design
Svart drop30 cm
FallfärgVit
MonteringssättTak
Prestanda
Betraktningsvinkel80°
Diagonal366 cm
Fjärrstyrdcheckmark
Typ av driftMotoriserad
Native bildförhållande16:10
Sammanlagd skärmstorlek (höjd x bredd)204 x 320 cm
Synlig skärmbredd (B)3,1 m
Synlig skärmhöjd (H)194 cm
EAN8700101030587
Source: Icecat.biz

Attractive and durable built-in solution with tab-tensioned system for flat projection screen surface at all times. Building in a projection screen efficiently was never so easy.

- Easy Serviceability System: once installed, the motor and screen surface remain accessible making adjustments and carrying out maintenance possible. The bottom panel and case remain connected to each other.
- Easy to build into existing non-modular ceilings.
- The case and the projection screen surface can be made to exactly the right size and the case is available in any colour for optimal integration into any interior.
- The projection surface is extremely flat, making it suitable for all types of data and video projection.
- Includes built-in radio frequency receiver, making it possible to operate the screen using the remote control supplied.

Customisation
- Shorten or reduce the width of the projection screen surface.
- Shorten the case and shorten or reduce the width of the projection screen surface.
- Paint the case, slat bar and plastic components in a different RAL colour. When the screen needs to match a specific colour scheme, we can paint the case in any colour specified.
- Reverse installation of the surface so that the projection side is located to the rear. Specify this method when the projection screen surface needs to exit the case reversely because the normal screen path is obstructed by an obstacle or because the case is to be mounted to a beam. Note that there are two reverse installation options. The projection screen fabric can either be configured to exit the case at the front or the mounting brackets can be mounted in reverse. Indicate clearly what your requirement is so that Projecta can produce the screen required.
- Extension of the projection screen surface. If required and technically feasible, Projecta installs a longer projection surface in the case.
- Extension of the projection screen surface with additional black drop. When the projection screen surface needs to be extended and a larger black border is required at the top or bottom, we adapt the surface to your specifications.
- Motor positioned on the right rather than on the left. When the motor and connection box need to be positioned on the right to make connection easier, we adapt the screen to suit.
- The Projecta Screen Designer assists designing the projection screen that exactly meets the needs of the installation. Use this application to generate a PDF file with the specifications of the customised screen. E-mail or fax the drawing to Projecta to request a quotation.

Ingen prisutvecklingsinformation för denna produkt.

Multitronic lagerbutik: 0 st
Beräknad leverans: Okänd
Multitronic | JNT Jakobstad: 0 st
Beräknad leverans: Okänd
Multitronic Seinäjoki: 0 st
Beräknad leverans: Okänd
Multitronic | iTronic Jyväskylä: 0 st
Beräknad leverans: Okänd
Multitronic | iTronic Villmanstrand: 0 st
Beräknad leverans: Okänd
Multitronic Mariehamn: 0 st
Beräknad leverans: Okänd
iTronic Vasa: 0 st
Beräknad leverans: Okänd

Startsida

Meny

Köpkorg

Sökning