logo Multitronic Oy
Mjölnaregatan 10
65100 Vasa
Web: www.multitronic.fi
Telefon: 06 - 319 77 00
E-post: info@multitronic.fi

PrimaFIX fästpenna - Förhindra warping

Tillverkare: 3D PRIMA
ID: 23994
1790€ Visa Moms 0% Visa Moms 24%
Beräknad leverans: 02.04 - 04.04
2st tillgängligt
Välj din butik
Beställ och hämta efter 1-4 dagar Öppet idag: Stängt (Långfredagen) Information om butiken
Beställ och hämta efter 1-4 dagar Öppet idag: Stängt (Långfredagen) Information om butiken
Beställ och hämta efter 1-4 dagar Öppet idag: Stängt (Långfredagen) Information om butiken
Beställ och hämta efter 1-4 dagar Öppet idag: Stängt (Långfredagen) Information om butiken
Beställ och hämta efter 1-4 dagar Öppet idag: Stängt Information om butiken
Beställ och hämta, 1st i lager Öppet idag: Stängt (Långfredagen) Information om butiken
Beställ och hämta efter 2-4 dagar Öppet idag: Stängt (Långfredagen) Information om butiken
Multitronic lagerbutik
Multitronic | JNT Jakobstad
Multitronic Seinäjoki
Multitronic | iTronic Jyväskylä
Multitronic | iTronic Villmanstrand
Multitronic Mariehamn
iTronic Vasa
Produktspecifikation
Beskrivning
På lager i butiker 1
Leverans
Prisutveckling
EAN7340002114934
Source: Icecat.biz

PRIMAFIX ADHESIVE - PREVENT WARPING

PrimaFIX – the best and easiest solution for effortless printing on printers with a heated build plate.

PrimaFIX works with the most common materials on the market such as PLA, PET-G, ABS, Wood and Flex. When you use PrimaFIX you should do so with a printer that has a heated build plate as the active substance in PrimaFIX activates when the temperature rises above 40 degrees.
When the print is finished and the build plate cools down you can easily remove your object from the plate.
Thanks to the special applicator pad it´s very easy to get an even coating on your build surface.

After use you can wipe or wash the build plate with some luke-warm water.

Use like this:

Prepare PrimaFIX by shaking the bottle for a few seconds.
Apply PrimaFIX by pressing the pad on your build surface to prime the pad. Then apply in circular overlapping motion until the print surface is covered.
Start your print by using the settings you regularly use for your favorite filament. The liquid will dry as the heat bed warms up and create a perfect surface for you to print on. After the print is done, let the heat bed cool off and then just remove the print.

Multitronic lagerbutik: 0 st
Beräknad leverans: 30.03 - 02.04
Multitronic | JNT Jakobstad: 0 st
Beräknad leverans: 30.03 - 02.04
Multitronic Seinäjoki: 0 st
Beräknad leverans: 30.03 - 02.04
Multitronic | iTronic Jyväskylä: 0 st
Beräknad leverans: 30.03 - 02.04
Multitronic | iTronic Villmanstrand: 0 st
Beräknad leverans: 30.03 - 02.04
Multitronic Mariehamn: 1 st
Beräknad leverans: 02.04
iTronic Vasa: 0 st
Beräknad leverans: 31.03 - 02.04
Avhämtning från butiken
Beräknad leveranstid: Idag
Gratis
Postens paketautomat
Beräknad leveranstid: 01.04 - 03.04
4,90 €
Postpaket
Beräknad leveranstid: 02.04 - 04.04
4,90 €
Matkahuolto Närpaket
Beräknad leveranstid: 02.04 - 04.04
4,90 €
Till dörren-paket
Beräknad leveranstid: 02.04 - 03.04
6,90 €
Hempaket
Beräknad leveranstid: 02.04 - 03.04
16,90 €

Startsida

Meny

Köpkorg

Sökning