![Intel D3 S4510 7680 GB, SATA III, 2.5" - SSD](https://cdn.multitronic.fi/images/prod/B/C/SSDSC2KB480G801-1.jpg "Intel D3 S4510 7680 GB, SATA III, 2.5" - SSD")
Ingen prisutvecklingsinformation för denna produkt.
Produkten är inte tillgänglig
Produkten har utgått från sortimentet eller är inte tillgänglig för tillfället.
Produkten har utgått från sortimentet eller är inte tillgänglig för tillfället.
Produktspecifikation
Välj en eller flera funktioner för att söka efter produkter med samma specifikationer.
Produktspecifikation
Beskrivning
På lager i butiker
Leverans
Prisutveckling
| Tekniska data | |
| Enhetstyp | SSD |
| Strömtillförsel | |
| Strömförbrukning (viloläge) | 1,7 W |
| Strömförbrukning (max) | 4,6 W |
| Miljökrav | |
| Temperatur vid drift | 0 - 70 ° C |
| Stötar vid drift | 1000 G |
| Stötar i avstängt läge | 1000 G |
| Maximal arbetstemperatur | 70 ° C |
| Icke-drift vibrationer | 3,13 G |
| Vibrationer vid drift | 2,17 G |
| Maximal Icke fungerande höjd | 0,5 m |
| Specialegenskaper | |
| Intel® Rapid Start-teknik |  |
| Intel® Smart Response Technology | |
| Intel® High Endurance Technology (HET) | |
| Övriga egenskaper | |
| Endurance betyg | 12,3 PB |
| Prestanda | |
| Diskkapacitet | 8000 GB |
| Egenskaper | |
| Diskkapacitet | 7,68 TB |
| Gränssnitt | Serial ATA III |
| Kryptering/säkerhet | 256-bit AES |
| Medeltid mellan fel (MTBF) | 2000000 h |
| Minnestyp | TLC 3D NAND |
| Läshastighet | 550 MB/s |
| Skrivhastighet | 510 MB/s |
| Random skrivning (4KB) | 21000 IOPS |
| Slumpvis läsning (4 kB) | 89500 IOPS |
| Komponent för | Server/arbetsstation |
| Okorrigerbara Bit Error Rate (UBER) | < 1 per 10^17 bits read |
| Förbättrad effekt Loss Data Protection-teknik |  |
| Hårdvarukryptering | |
| End-to-End-dataskydd | |
| SSD-diskens formfaktor | 2.5" |
| EAN | 675901519601 |
| Garanti | 1 år |
Standard endurance SATA drives, available in a wide range of capacities, designed to increase server efficiency and boost IOPS/TB performance over legacy hard disk drives (HDDs).
Replace HDDs with the highly efficient Intel SSD D3-S4510 and D3-S4610 Series to reduce storage operating cost, and accelerate read-intensive workloads with power- efficient performance.
Move to more efficient storage while preserving your legacy infrastructure. Replacing HDDs with the Intel SSD D3-S4510 and D3-S4610 Series based on 64-layer Intel 3D NAND TLC, reduces the storage operating cost, accelerates read-intensive workloads at higher service levels and improves overall system dependability and flexibility.
These reliable SSDs meet demanding service level requirements while increasing server efficiency. Innovative SATA firmware and the latest generation of Intel 3D NAND make SSD D3-S4510 and D3-S4610 compatible with existing SATA setups for an easy storage upgrade.
Reduce Operating Cost While Preserving Infrastructure Investment
Built for compatibility with legacy infrastructures, the SSD D3-S4510 and D3-S4610 minimize the costs associated with modernizing your data center. Available in a variety of capacities, from 240GB up to 7.68TB, in a standard 2.5-inch, and M.2 form factor, the larger capacity drives consume up to 6x lower power and have up to 6x lower cooling requirements than 2.5-inch HDDs. The SSD D3-S4510 and D3-S4610 also enable 3.2x more data to be stored in the same amount of space.
Accelerate Read-Intensive Workloads with Power-Efficient Performance
Simply by integrating SSDs into the environment, organizations can improve server agility with up to 300x more IOPS/TB than HDDs, supporting more users and better services to grow the business without expanding the server footprint. Additionally, the Flex Workload feature enables a common drive type to cover more workloads with flexible capacity, flexible endurance, and flexible power-efficient performance.
Improve System Reliability and Flexibility
The reliability of the SSD D3-S4510 and D3-S4610 reduces the need for drive replacement that is necessary with HDDs. With a 4.2x lower annualized failure rate (AFR) compared to HDDs, IT departments will spend less time and expense replacing or upgrading storage devices. Equally important, once the SSDs are installed, the innovative SATA firmware completes updates without reset, reducing downtime.
Replace HDDs with the highly efficient Intel SSD D3-S4510 and D3-S4610 Series to reduce storage operating cost, and accelerate read-intensive workloads with power- efficient performance.
Move to more efficient storage while preserving your legacy infrastructure. Replacing HDDs with the Intel SSD D3-S4510 and D3-S4610 Series based on 64-layer Intel 3D NAND TLC, reduces the storage operating cost, accelerates read-intensive workloads at higher service levels and improves overall system dependability and flexibility.
These reliable SSDs meet demanding service level requirements while increasing server efficiency. Innovative SATA firmware and the latest generation of Intel 3D NAND make SSD D3-S4510 and D3-S4610 compatible with existing SATA setups for an easy storage upgrade.
Reduce Operating Cost While Preserving Infrastructure Investment
Built for compatibility with legacy infrastructures, the SSD D3-S4510 and D3-S4610 minimize the costs associated with modernizing your data center. Available in a variety of capacities, from 240GB up to 7.68TB, in a standard 2.5-inch, and M.2 form factor, the larger capacity drives consume up to 6x lower power and have up to 6x lower cooling requirements than 2.5-inch HDDs. The SSD D3-S4510 and D3-S4610 also enable 3.2x more data to be stored in the same amount of space.
Accelerate Read-Intensive Workloads with Power-Efficient Performance
Simply by integrating SSDs into the environment, organizations can improve server agility with up to 300x more IOPS/TB than HDDs, supporting more users and better services to grow the business without expanding the server footprint. Additionally, the Flex Workload feature enables a common drive type to cover more workloads with flexible capacity, flexible endurance, and flexible power-efficient performance.
Improve System Reliability and Flexibility
The reliability of the SSD D3-S4510 and D3-S4610 reduces the need for drive replacement that is necessary with HDDs. With a 4.2x lower annualized failure rate (AFR) compared to HDDs, IT departments will spend less time and expense replacing or upgrading storage devices. Equally important, once the SSDs are installed, the innovative SATA firmware completes updates without reset, reducing downtime.
Multitronic Vasa: 0 st
Beräknad leverans: Ingen leverans information
Beräknad leverans: Ingen leverans information
Idag: 11:00 - 15:00
Multitronic Jakobstad: 0 st
Beräknad leverans: Ingen leverans information
Beräknad leverans: Ingen leverans information
Idag: Stängt
Multitronic Jyväskylä: 0 st
Beräknad leverans: Ingen leverans information
Beräknad leverans: Ingen leverans information
Idag: Stängt
Multitronic Villmanstrand: 0 st
Beräknad leverans: Ingen leverans information
Beräknad leverans: Ingen leverans information
Idag: Stängt
Multitronic Mariehamn: 0 st
Beräknad leverans: Ingen leverans information
Beräknad leverans: Ingen leverans information
Idag: 10:00 - 14:00
De tekniska uppgifterna ovan är endast avsedda som referens och kan ändras. Vi förbehåller oss rätten att korrigera tryckfel och att använda illustrationer som vägledning. Viss text kan vara autogenererad eller maskinöversatt, vilket kan leda till felaktigheter.