Makita, LH1201FL, 1650 W, 30.5 cm Combination table and mitre saw

The Makita LH1201FL Combination Table and Mitre Saw serves two roles: cross-cutting and panel installation tasks. Powered by a 1,650 W corded motor, the tool reaches an idle speed of 3,800 RPM. It accommodates a 305 mm blade, delivering a 95 mm straight cutting depth at 90°. This configuration is designed to process wood, laminate, parquet, floorboards, and panels. Tradespeople can switch between table-saw ripping and mitre-saw cross-cutting modes without changing machines. By combining two stationary operations, the unit saves floor space in fixed workshop environments.

A 40-tooth blade with a 30 mm bore and 2.3 mm thickness is included for immediate use. The cast-aluminium base plate provides a rigid foundation, and the tool measures 610 mm in overall length. Weighing 20.9 kg, the saw relies on a 2.5 m power cable for mains connection. Mitre adjustments span 47° to the left and 45° to the right for angled crosscuts. Bevel capacities reach 45° on both sides for symmetrical compound angles. These mechanical adjustments allow for accurate execution of complex joinery cuts on standard timber stock.

• 65 mm cutting depth at 45° – supports deeper angled crosscuts in thick timber.
• 52 mm maximum cutting thickness – defines the material height limit for table saw operations.
• 93 dB sound pressure level – indicates the operator noise exposure during active cutting.
• 106 dB sound power level – provides the rated acoustic output for workshop planning.
• Laser guide and LED work light – projects the cut path and illuminates the material surface.
• Soft start mechanism – ramps up motor speed gradually to limit initial torque.
• Integrated dust extraction port – connects directly to a standard vacuum hose for debris management.