FLASHFORGE PETG PRO, 1.75 mm, 500 g 3D Printer Filament, White

The FLASHFORGE PETG PRO White 3D Printing Filament, 500 g, 1.75 mm is a PETG material for FFF printing, intended for functional parts, prototypes and models. It is described as combining strength and impact resistance with some flexibility. Its listed impact strength is 4.7 kJ/m², giving a measurable reference for impact performance. Elongation at break is 37.5%, indicating how far the material extends before breaking. Product information describes it as suitable for outdoor use and resistant to moisture and chemicals. These properties make it relevant for prints where impact resistance or exposure to the elements matters.

The stated print process is FFF, and the filament is intended for printers that accept 1.75 mm filament. Feed diameter is therefore an important compatibility check before loading it. The product is supplied as one spool, not a multi-spool pack. It is also marked as easy to use, although no specific handling or storage instructions are provided. Printer setup should account for the material's nozzle and build-plate requirements.

• Nozzle temperature: 230 °C recommended, within a stated range of 220–240 °C.
• Build-plate temperature: 70–80 °C.
• Print speed: 50 mm/sec.
• Specific gravity: 1.27 g/cm³.
• Packaged weight: 760 g.