Einhell - Smart Battery Charger, CE-BC 30 M

The Einhell CE-BC 30 M Battery Charger is an intelligent battery-charger device adapted to the technically highly developed, high-performance batteries found in modern vehicles. The intelligent, micro-processor controlled unit is suitable for a wide range of vehicle battery types and comes with a variety of technical safety and maintenance mechanisms. The main focus of development has been on fast, battery-friendly charging, so that the longest possible lifetime with full performance is achieved. Operating the charger is more straightforward than with conventional devices thanks to a detailed charge status display. This Einhell all-rounder is suitable for gel batteries, AGM batteries and maintenance-free and low-maintenance lead-acid batteries. The CE-BC 30 M is suitable for 12V and 24V batteries. The multi-stage charging cycle of the Einhell Battery Charger is automatically monitored and adjusted by the micro-processor controller. The smart control electronics analyze the type and condition of the connected battery, and initiates the most appropriate charging mode to suit what is required. The trickle charge function protects and conserves the battery for a continuously optimum charge level. This makes the CE-BC 30 M suitable for all types of vehicle, particularly seasonal vehicles with long laidup times. Instead of allowing the battery to slowly discharge fully and risking an exhaustive discharge as a result, the battery is kept topped up to its optimum level using trickle charging. The trickle charge relieves the battery cells and extends working life, preventing avoidable, cost-intensive replacement of a defective vehicle battery. Cars, motorbikes and scooters are immediately ready for use at the start of the season. The Einhell Battery Charger can provide battery assist using jump-start mode, delivering 100 A starting current (max. 5 seconds) After briefly charging the capacitor, the charger can produce a jump-start to bring the vehicle engine to life instantly - similar to a jump-start using a second vehicle. The Einhell Battery Charger is equipped with automatic over-charge, short circuit and reverse polarity protection. These protection mechanisms not only protect the charger, but also the battery. The LED battery voltage and charge status display shows at a glance the current state of the battery and the mode in which the charger is operating. Thanks to its fully-insulated clamps, the Einhell Battery Charger can be connected easily and safely.