Einhell GC-DP 9035 N Submersible Waste Water Pump, 900 W, 18000 l/h Stainless Steel

The Einhell GC-DP 9035 N Submersible Waste Water Pump is an AC-powered unit designed for draining flooded areas such as basements, construction pits, and garden ponds. Operating on mains electricity, it draws 900 W at full load to clear large volumes of standing water. It delivers a flow rate of 18,000 litres per hour, handling demanding drainage tasks. With a maximum delivery head of 9 metres, the unit can push water out of deep excavations or lower-ground rooms. A maximum operating pressure of 0.9 bar maintains consistent output during continuous operation. Built as a dedicated solution for contaminated water, it takes on jobs that standard clean-water models cannot support.

Constructed with a stainless steel housing, the pump resists corrosion during prolonged submersion. Weighing 5.95 kg, it has enough mass to stay stable underwater while remaining manageable for a single-person setup. A built-in carrying handle makes it easier to move across outdoor sites or down into flooded cellars. The pump comes with a 10-metre H07RN-F power cable, providing extensive reach without needing an immediate electrical outlet. Rated for a maximum immersion depth of 5 metres, it works reliably when placed deep in flooded environments. Connection to existing drainage setups uses a 47.8 mm (1 1/2 inch) male thread and a 25/38 mm hose connector.

• Maximum solid particle size of 35 mm – handles suspended grit and debris without clogging the internal mechanism.
• Adjustable float switch – enables automatic activation and deactivation based on the surrounding water level to prevent dry running.
• Maximum input water temperature of 35 °C – maintains safe operation in sun-warmed ponds or warm wastewater runoff.
• Maximum suction height of 5 m – provides a reliable initial water draw from below the pump line.
• Suitable for outdoor use – withstands exterior environmental conditions during continuous garden and site drainage.