Kärcher Wet and Dry Floor Nozzle DN 40, 360 mm, Basalt grey

The Kärcher Wet and Dry Floor Nozzle DN 40, 360 mm, 6.907-408.0 is a plastic floor nozzle accessory built for Kärcher wet-and-dry vacuum cleaners. Its 360 mm working width spans a broad path across hard and textile floor surfaces, collecting dry debris and liquid in a single pass. Integrated brush strips sweep fine particles into the suction channel, while squeegees direct liquid toward the intake for wet pickup. Side rollers along the edges keep the nozzle tracking steadily during use. The unit is rated for professional wet-and-dry floor cleaning applications and is intended as a direct replacement for Kärcher part 6.906-554.0.

The housing is moulded from basalt-grey plastic and weighs 400 g, adding minimal drag to the vacuum hose during operation. Overall dimensions are 360 mm wide, 75 mm tall, and 370 mm deep, giving a compact profile for storage between cleaning sessions. A DN 40 nominal connection mates the nozzle directly to compatible Kärcher hoses without intermediate adapters. Compatibility covers Kärcher NT series professional wet-and-dry models that use DN 40 accessories. The nozzle ships as a single pre-assembled unit with brush strips, squeegees, and side rollers pre-installed.

• 360 mm working width — covers approximately 0.36 m per pass, reducing total strokes on wide floor areas
• 75 mm profile height — slides beneath low-clearance furniture and shelving where taller nozzles stall
• 400 g total weight — lighter than metal-housed alternatives, reducing wrist fatigue over extended shifts
• Plastic construction — does not corrode from sustained contact with standing water and cleaning fluids
• DN 40 nominal connection — matches the standard hose fitting shared across the Kärcher NT professional range