Kärcher BP 6 Deep Well Immersion Pressure Pump, 1000 W, 5000 l/h, 55 m, Stainless Steel

The KÄRCHER BP 6 Deep Well Immersion Pressure Pump is designed for extracting groundwater from deep boreholes. This mains-powered unit supplies domestic water systems or drives garden irrigation setups. The 1000-watt motor draws enough energy for continuous domestic and garden use. Performance is defined by a maximum flow rate of 5000 litres per hour, moving high volumes over a short period. Alongside this capacity, the pump achieves a maximum delivery head of 55 metres, lifting fluid from deep subterranean reserves to ground level.

Construction relies on a stainless steel housing, which resists corrosion during permanent outdoor deployment. At 13.7 kilograms, the unit has enough mass to stay physically stable when suspended in a narrow well. Installation is simplified by a 30-metre power cable that provides ample reach without needing immediate extension cords. Control is straightforward thanks to a dedicated on/off switch, giving operators direct management over active pumping phases. The metallic and black finish keeps a practical exterior while withstanding prolonged submerged conditions.

• Maximum immersion depth of 27 m – enables safe placement far below the water table.
• Operating pressure of 5.5 bar – maintains consistent force for running sprinklers or household plumbing fixtures.
• Integrated water filter – protects the internal impeller mechanism from suspended natural debris.
• Maximum grain size tolerance of 0.9 mm – prevents larger soil particulates from entering and clogging the system.
• H07RN-F power cable classification – ensures the wiring is suitably rated for continuous underwater deployment.
• Maximum input water temperature of 35 °C – handles typical seasonal fluctuations in groundwater conditions.