Bosch PRO SDS plus Rebar Cutter 25 x 120 / 300 mm

The Bosch PRO SDS plus Rebar Cutter 25 mm is a masonry bit built for heavy construction work. Its main purpose is to drill through steel reinforcement bars embedded in concrete. Standard masonry bits tend to stall or clog when they hit metal, but this cutter drives straight through. It uses a dedicated cutting geometry that grinds the steel down instead of snagging on it, so operators can keep drilling without changing the bit when they meet reinforcement. A built-in ventilation opening lets heat escape and prevents thermal damage during extended use.

Mounting this cutter requires a rotary hammer, not a standard combi drill. It connects directly to compatible machines without the need for a separate chuck adapter. The internal geometry clears waste and metal chips from the hole to keep drilling efficient. Because it is designed to cut through dense metal, the bit is intended for rotary action only — not impact hammering. It relies purely on the tool's rotational force to mill through embedded rebar. Professionals carrying out structural renovation work will find it handles complex masonry layers consistently.

• 300 mm overall length gives extended reach through thick concrete walls and deep masonry.
• 120 mm working length sets the maximum drilling depth before the hole needs clearing.
• 10 mm SDS plus shank provides a secure fit and direct compatibility with standard professional hammer drills.
• 600 g total weight adds mass to help the operator maintain downward pressure.
• Tungsten carbide teeth resist dulling during high-friction steel grinding.
• Single-piece construction removes the need for assembly and reduces potential failure points under load.