eLOAD P3 Mobile EV Charger, CEE 3x16 A / 400 V - Type 2, 11 kW, 5 m, Black

The eLOAD P3 Mobile EV Charger is a 5-metre, 16-amp charging cable with a male CEE 3x16 A / 400 V plug and a female Type 2 connector. This Mode 2 cable connects electric and hybrid vehicles to a standard three-phase industrial socket. By using existing high-voltage infrastructure, it removes the need for a permanently installed wallbox. The unit delivers up to 11 kW directly to the vehicle's onboard charger. The connector is compatible with European EVs equipped with a Type 2 inlet, and the black finish helps mask dirt and scuffs from daily use.

An inline control module allows users to manually adjust the electrical draw before starting a charge. You can limit the current to 8 A, 10 A, or 13 A to accommodate restricted or shared circuits. The system is designed for harsh Nordic climates and continuous outdoor use. The internal wiring provides consistent three-phase power, while the outer cable remains flexible enough to coil for storage. The assembly is balanced for regular transport in a vehicle boot. The hardware requires no installation and activates as soon as it is connected to a 400 V socket.

• IP65-rated control box: Dust-tight and protected against low-pressure water jets from any direction.
• IP54-rated Type 2 connector: Splash-proof to ensure a safe connection in wet weather.
• Residual current protection: Includes a Type A AC RCD with DC fault monitoring to cut power during electrical faults.
• Built-in delay timer: Postpone charging for up to 10 hours to take advantage of off-peak electricity rates.
• Operating temperature range: Remains functional in temperatures from -30 °C to +50 °C.