Creality Hyper Series PLA 1.75 mm, 1 kg 3D Printer Filament, Red

The Creality Hyper Series PLA Filament 1.75 mm 1 kg Red is a 3D printing material formulated for Fused Filament Fabrication (FFF) systems. Its main feature is a formulation designed for high-speed printing, supporting feed rates of up to 600 mm/sec when used with suitable equipment. A diameter of 1.75 mm is held to a manufacturing tolerance of 0.03 mm. High fluidity and rapid cooling keep extrusion stable and layer formation consistent at elevated feed rates. It comes on a single red spool with a net filament weight of 1,000 g and is intended for general-purpose printing, including prototypes and functional components.

Operating temperatures require a nozzle range of 190 to 230 °C, with 210 °C as a practical starting point, and a build plate temperature of 25 to 60 °C. Mechanically, the material has a tensile strength of 52,990 kPa and an elongation at break of 6.304%. Flexural strength is 92.381 MPa, and impact strength is 8.8344 kJ/m². The filament has a specific gravity of 1.25 g/cm³. This product is compatible with standard FDM printers that support the 1.75 mm form factor.

• Tensile modulus of 1,146.06 MPa, providing a measured indication of material stiffness.
• Flexural modulus of 2,490.18 MPa, indicating resistance to bending under load.
• Package weight of 1,290 g, including the spool core.
• Spool dimensions of 210 x 210 x 70 mm to confirm fitment on printer spool holders.
• Listed compatibility with Creality 3D printers, alongside general FFF support.