Creality Hyper PLA, Rainbow, 1.75 mm, 1 kg 3D Printer Filament, Wild Blossom-Short

The Creality Hyper Rainbow PLA Wild Blossom-Short Gradient 1 kg is a polylactic acid filament designed for Fused Filament Fabrication and Fused Deposition Modeling 3D printers. Its 1.75 mm diameter fits standard desktop hardware. The material features a blue, green, and pink gradient pattern that shifts approximately every 6 to 8 metres. It supports print speeds up to 300 mm/sec to accommodate the rapid production of decorative models and prototypes. This spool provides material suited for small to medium-sized projects.

Extrusion requires a temperature between 190 and 230 °C, with a recommended guideline of 210 °C. Users should configure the build plate between 25 and 60 °C. Operating within these thermal parameters ensures stable adhesion and layer formation for the multicoloured prints. The filament is engineered for consistent extrusion and is categorised as easy to use for beginners and hobbyists. Compatibility spans typical FDM and FFF 3D printer setups.

• Net filament weight of 1000 g provides a substantial supply for extended print runs.
• Material density of 1250 kg/m³ dictates the physical weight of finished objects.
• Tensile modulus rated at 44.37 MPa indicates resistance to elastic deformation.
• Flexural modulus measured at 74.345 MPa reflects behaviour under bending stress.
• Elongation at break reaches 10.73 per cent before material failure.
• Total package weight is 1290 g, including the spool and box.
• Country of origin is China.