Creality CR-Silk PLA, Silk, 1.75 mm, 1 kg 3D Printer Filament, Red Copper

The Creality CR-Silk PLA Filament Red Copper 1.75 mm 1 kg is a 3D printing polymer formulated for fused filament fabrication (FFF) machines. It comes on a single 1 kg spool with a 1.75 mm diameter. The nozzle temperature range spans 190–230 °C, with a recommended guideline of 210 °C. The Red Copper colour yields a smooth, glossy surface finish that mimics a metallic sheen. This formulation extrudes consistently to produce visually focused prints directly from the printer.

This polymer is relatively easy to print and exhibits low shrinkage alongside reduced deformation during cooling. A typical print speed of 40 mm/sec accommodates standard desktop hardware. The build plate can remain unheated or be set up to 60 °C, depending on the printer setup. Mechanically, the material records a tensile strength of 35,000 kPa and a tensile modulus of 35 MPa. The flexural strength reaches 67 MPa, providing adequate resistance to bending for standard decorative components.

• Silk PLA composition for visually focused prints
• Broad compatibility with Creality 3D and most other FDM/FFF printers using 1.75 mm filament
• Supplied as a single spool in boxed packaging with a 1.29 kg gross weight
• Designed to be easy to use for beginners, hobbyists, and makers
• Operates using fused filament fabrication (FFF) technology