SUNLU PLA, Matte, 1.75 mm, 1 kg 3D Printer Filament, White

The SUNLU PLA M W Matte PLA Filament is a 1.75 mm white thermoplastic designed for fused filament fabrication (FFF) and fused deposition modeling (FDM) 3D printers. Its primary function is to produce a low-gloss, soft-touch surface that minimises the visible appearance of layer lines on printed models. A diameter tolerance of ±0.02 mm ensures consistent feeding and extrusion during operation. Printing requires a nozzle temperature of 215 °C and a heated build plate set between 50 °C and 60 °C. The material is formulated to show low shrinkage during cooling, which helps prevent warping on the build plate.

Each spool is wound to reduce the risk of tangling during extended or unattended prints. The physical dimensions of the spool are 220 × 220 × 80 mm, making it structurally suitable for automated filament management hardware. It integrates directly with Bambu Lab AMS, AMS Lite, AMS 2 Pro, AMS HT, and standard MMU systems without requiring adapters. This compatibility supports multi-colour or multi-material printing workflows on supported machines. Universal compatibility designations allow use across standard FFF and FDM printer brands.

• 1000 g spool capacity: Provides a standard volume of material for multiple medium-sized prints
• 100 mm/sec print speed rating: Aligns with standard desktop FFF printing parameters
• 39 MPa tensile strength: The pulling force required for material failure
• 72 MPa flexural strength: The structural resistance to bending stress
• 5 kJ/m² impact strength: The kinetic energy absorbed before physical fracture
• 15% elongation at break: The stretching deformation limit before the material snaps
• 1.31 g/cm³ specific gravity: The standard mass per unit volume for this polymer