QNAP QSW-IM1200-8C - Managed Layer 2 Switch, Black

The QNAP QSW-IM1200-8C is a 12-port managed 10GbE Layer 2 switch designed for high-traffic environments. This non-PoE model offers a total switching capacity of 240 Gbit/s. It features 12 10GbE-capable ports, consisting of four dedicated SFP+ fiber slots and eight combo 10G SFP+/RJ-45 ports. These interfaces allow the use of either fiber or copper cabling within the same port block. With a maximum data transfer rate of 10 Gbit/s per port, the hardware supports high-load connections from servers, storage arrays, or core network uplinks.

The unit features a rack-mountable black chassis. Network configuration is managed via a web-based interface or an RS-232 console port for direct access. Traffic segmentation and prioritization are handled through VLANs, Quality of Service (QoS) protocols, and access control lists (ACL). The switch manages multicast streams using IGMP snooping. It is powered by a DC source, draws a maximum of 78 W under full load, and supports firmware updates.

• Packet forwarding performance of 120 Mpps.
• Support for 9000-byte jumbo frames to reduce packet overhead during large-scale data transfers.
• 16,000-entry MAC address table for routing data to connected devices.
• Compliance with IEEE standards, including 802.1Q, 802.3ad, and 802.3bz.
• Integrated DHCP client for automated IP address assignment.