BOSCH SDS plus-5 SDS Plus Hammer Drill Bit 6 x 100 x 165 mm

The Bosch SDS plus-5 SDS Plus Hammer Drill Bit 6 × 100 × 165 mm is a single carbide masonry bit for impact drilling. Unlike an assorted set, it provides one fixed size for a defined hole requirement. It is rated for brick, concrete, limestone and stone. Suitable tasks include construction, installation, renovation and general masonry work. The bit is specifically intended for drilling anchor and fixing holes in those substrates. Its narrow scope is useful when a consistent hole size is needed rather than a range of bit diameters.

The centring design helps the tip start accurately and stay in position as drilling begins. Impact resistance at the cutting end is intended for hard masonry applications. As a passive accessory, the bit relies on a compatible rotary hammer or hammer drill for rotation and impact action. The dedicated shank format requires a host tool with the corresponding mounting system. Its stated drilling reach allows for deeper holes than shorter masonry bits. Tool interface and required hole depth are therefore the main checks before purchase.

• 6 mm drilling diameter, with a stated maximum concrete drilling diameter of 6 mm.
• 100 mm working length defines the available drilling reach.
• 165 mm overall length provides the stated end-to-end size.
• SDS Plus shank fits compatible SDS Plus rotary hammers and hammer drills.
• Manufactured in Germany.