DeWALT DT4535-QZ Brad Point Wood Drill Bit Set (5-Piece)

The DeWALT DT4535-QZ Brad Point Wood Drill Bit Set is a 5-piece chrome-vanadium alloy steel set designed for clean, accurate drilling in timber. The brad point geometry centres the bit on contact and starts the hole without wandering, so operators can drill into softwoods and dense hardwoods without pilot holes or centre punching. The cutting edges and flute design also keep tear-out to a minimum on plywood and other sheet materials, where splintering is otherwise common.

Manufactured in Germany to tight production tolerances, the bits stay rigid at high rotational speeds, reducing lateral deflection when density changes within a single board. The 1/4-inch (approximately 6.35 mm) reduced shanks fit standard three-jaw chucks directly, with no adapter needed.

• Sizes 4 mm, 5 mm, 6 mm, 8 mm, and 10 mm cover the most common dimensions for metric furniture assembly and joinery.
• Dowel and through-hole geometry ensures accurate positioning and clean exit points on finished timber surfaces.
• Precision-ground cutting edges shear wood fibres cleanly, reducing tear-out on the workpiece.
• Deep clearing flutes eject debris from the bore, keeping friction and heat down.
• Standard rotary drilling compatibility for use in conventional chucks without impact or hammer modes.