Bosch Expert SDS-plus-7X Hammer Drill Bit 12 x 950 x 1000 mm

The Bosch Expert SDS-plus-7X Hammer Drill Bit 12 x 950 x 1000 mm is a one-piece carbide SDS-plus hammer drill bit designed for deep structural anchoring. It delivers consistent performance when drilling into solid concrete, natural stone, and reinforced concrete, and is commonly used by tradespeople for long-reach fastener installations in demanding mineral building materials. The head geometry keeps the bit on a straight, controlled feed during heavy use, allowing it to pass through metal reinforcement without seizing. These characteristics make it well suited to contractors carrying out complex foundation work.

The extended profile lets operators drill through exceptionally thick walls in a single continuous pass. High torque and impact energy from the host machine are transferred efficiently down the shaft without deflection, so the hole progresses steadily with no need to stop or re-centre the bit. A standard SDS-plus mounting ensures compatibility with a wide range of professional rotary hammers. Built to withstand prolonged mechanical stress on site, the bit holds its dimensional accuracy through repeated heavy-duty cycles.

• Four distinct cutting edges reduce the risk of jamming when striking rebar.
• 12 mm operating diameter produces correctly sized holes for standard heavy-duty anchors.
• 1000 mm total length provides extended reach through oversized building sections.
• 950 mm working length sets the maximum achievable depth per drilling cycle.
• Manufactured in Germany to tight tolerances for reliable masonry penetration.