Bosch Expert SDS-plus-7X Hammer Drill Bit 16 x 1000 millimetres

The Bosch Expert SDS-plus-7X Hammer Drill Bit 16 x 1000 mm is a single-piece masonry accessory with a solid carbide head. It is designed for rotary hammer drilling into concrete, stone, and reinforced masonry. The extended profile allows deep holes through thick foundations, and the dense material withstands the repeated impacts of sustained drilling. It is suitable for boring clean channels for heavy pipes or conduits through tough mineral substrates.

The slotted shank provides a secure fit in high-torque equipment. The head geometry is shaped to break down dense aggregate, and the flute design channels dust away from the tip to reduce friction and prevent jamming at depth. A reinforced shaft keeps the bit running true under load and helps dampen vibration, so the hole stays straight and clean in rigid materials. The grey shank transfers impact energy directly from the drill to the workpiece.

• 16 mm drill diameter for standard structural masonry anchors.
• 1000 mm overall length for through-hole boring in exceptionally thick walls.
• 950 mm working length for continuous penetration before the chuck limits depth.
• 4-cutter head geometry for efficient debris removal and wear resistance under heavy hammer impact.
• SDS Plus shank fits directly into compatible rotary hammer drills, no adapter needed.
• Suitable for both rotary drilling and hammer drilling in concrete and stone.