Einhell GC-DP 9040 N Submersible Dirty Water Pump, 900 W, 22,000 l/h, 9 m, 40 mm

The Einhell GC-DP 9040 N submersible dirty water pump is designed for the rapid drainage of flooded basements, building pits, and garden reservoirs. It runs on standard mains electricity, using a 900 W motor to handle demanding fluid transfer tasks. The pump delivers a maximum flow rate of 22,000 l/h, moving large volumes of liquid in a short timeframe. It also achieves a maximum delivery head of 9 m, providing enough vertical lift to push discharged water out of deep underground spaces. The model generates a maximum operating pressure of 0.9 bar to sustain output across varying site gradients. These specifications make it suitable for heavy-duty domestic and site clearance applications where immediate water removal is required.

Built to withstand harsh operating environments, the main housing combines impact-resistant plastic with a protective stainless steel cover. At 5.75 kg, the unit is manageable for manual deployment and includes an integrated carrying handle for straightforward transport. A 10 m power cable provides ample reach from a standard socket without the immediate need for an extension lead. Routine operation is managed by an infinitely height-adjustable float switch that automates the activation cycle based on the surrounding water level. This built-in mechanism prevents dry running while allowing the operator to set precise activation and deactivation points. The entire assembly is rated for outdoor use, supporting reliable functionality across exposed job sites.

• Maximum particle size of 40 mm – handles sand, gravel, and solid debris without internal clogging.
• Maximum immersion depth of 7 m – allows the unit to operate safely at the bottom of deep pits or large tanks.
• 2-inch (50 mm) hose connector and G1 1/2-inch male thread – ensures broad compatibility with standard commercial drainage hoses.
• 90-degree G 2-inch male thread elbow – enables horizontal hose routing to prevent kinking in confined spaces.
• Maximum water temperature of 35 °C – safely handles warm stagnant water often found in ponds during summer.