Bosch Dry Speed Diamond Dry Drill Bit for Ceramic 35 mm

This single-piece Bosch Dry Speed Diamond Dry Drill Bit for Ceramic, 35 mm, is designed to produce clean holes without liquid cooling. The core bit relies on a specialised cutting section to penetrate hard, brittle surfaces. It can be operated completely dry, avoiding the mess of traditional wet methods. It is intended for soft ceramic wall tiles during installation and fitting work. The dry process allows practical drilling speeds while preserving the structural integrity of the tile. Fitters use it to produce accurate openings needed for mounting components.

Operating this core bit depends on high rotational speeds to grind away material efficiently. Builders working in finished rooms benefit from this setup because the absence of coolant keeps the environment clean. The cylindrical geometry lets the tool pass through standard tile thicknesses continuously. Minimal downward pressure is needed, as the abrasive friction does most of the work. Maintaining steady control keeps the tile surface intact throughout the procedure. This straightforward approach reduces preparation time compared with setting up a wet-drilling rig.

• Vacuum-brazed diamond grit section grinds through hard surfaces and keeps edges clean on brittle materials.
• 35 mm cutting diameter produces exact, repeatable openings for fitting components during tiling installations.
• 35 mm maximum working length provides sufficient depth to penetrate standard ceramic wall tiles.
• 190 g weight adds minimal bulk to the power tool during precision handheld use.
• Angle grinder compatibility lets the bit use the high speeds needed for dry ceramic cutting.