Endorfy Fera 5, 120 mm CPU Cooler, Black

The Endorfy Fera 5 Black functions as an air cooling solution designed for managing thermal loads up to 220W TDP. Heat dissipation relies on an aluminum fin stack integrated with four copper heat pipes, each measuring 4mm in diameter. The base plate uses a direct metal contact design to facilitate efficient thermal transfer from the CPU Integrated Heat Spreader (IHS). This cooler employs an asymmetrical heatsink geometry to ensure compatibility and prevent interference with tall memory modules positioned close to the CPU socket.

The system utilizes a single 120mm fan featuring Fluid Dynamic Bearing (FDB) technology, specified for a Mean Time To Failure (MTTF) of 100,000 hours. Fan speed is managed via a 4-pin connector utilizing Pulse Width Modulation (PWM) control, allowing the rotational speed to scale between 250 RPM and 1800 RPM. This operational range results in minimum noise levels of 2.5 dB during low load and a maximum noise output of 20 dB under full rotational speed.

Mounting hardware is included to support a broad range of processor sockets, including current Intel LGA 1700 and AMD AM5 platforms, in addition to legacy sockets. The complete cooler assembly measures 155 mm wide, 127 mm deep, and 77 mm high, with a total mass of 815 grams. All external components of the unit are finished in black.

• Supports Intel LGA 1700, 1200, and AMD AM5, AM4 platforms
• Rated cooling capacity of 220W TDP
• Includes four copper heat pipes
• Fan speed adjusts dynamically from 250 RPM to 1800 RPM
• Maximum operational noise level of 20 dB
• Features 120mm fan with Fluid Dynamic Bearing technology
• Unit dimensions are 155 mm wide by 127 mm deep by 77 mm high