Key Specifications
Choose one or multiple features to search for items that have the same specifications.| Ports & interfaces | |
| Connectivity technology | Wired & Wireless |
| Ethernet LAN (RJ-45) ports | 1 |
| Gigabit Ethernet (copper) ports quantity | 1 |
| RJ-45 output ports | 1 |
| Basic switching RJ-45 Ethernet ports quantity | 1 |
| Weight & dimensions | |
| Weight | 200 g |
| Height | 34 mm |
| Width | 130 mm |
| Depth | 55 mm |
| Energy management | |
| Power over Ethernet (PoE) | ![]() |
| Output power | 15 W |
| Power source type | AC |
| AC input frequency | 50/60 Hz |
| AC input voltage | 100 - 240 V |
| Power consumption (max) | 25 W |
| Operational conditions | |
| Operating relative humidity (H-H) | 5 - 95% |
| Operating temperature (T-T) | -10 - 40 °C |
| Networking | |
| Ethernet LAN | ![]() |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11n |
| Power over Ethernet (PoE) | ![]() |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| 10G support | ![]() |
| Ethernet LAN interface type | Gigabit Ethernet |
| Data transmission | |
| Maximum data transfer rate | 866.7 Mbit/s |
| Packaging data | |
| Quantity per pack | 1 pc(s) |
| Certificates | |
| Compliance certificates | CE, Federal Communications Commission (FCC), Industry Canada (IC) |
| Wireless LAN features | |
| Frequency band | 5 GHz |
| Wi-Fi | ![]() |
| Wi-Fi band | Single-band (5 GHz) |
| Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
| Signal strength | 21 dBm |
| Packaging content | |
| Cables included | AC |
| Power supply included | ![]() |
| Mounting bracket(s) included | ![]() |
| Antenna | |
| Antenna type | 2x2 |
| Antenna gain level (max) | 5 dBi |
| Antenna connector type | RP-SMA |
| Antenna design | Internal & external |
| Design | |
| Reset button | ![]() |
| Housing material | Polycarbonate |
| Features | |
| Material | Polycarbonate (PC) |
| LED indicators | Signal strength, Status |
| Wall mountable | ![]() |
| Product colour | White |
| Reset button | ![]() |
| Mounting type | Wall |
| Product type | Network bridge |
| EAN | 0810084695883 |
| Warranty | 2 years |
The Ubiquiti UniFi Device Bridge (UDB) is a bridge and Power-over-Ethernet (PoE) adapter that connects wired equipment to a wireless UniFi network. Using a 5 GHz radio, the device converts wireless signals for use via its Gigabit Ethernet RJ45 port. It provides up to 15W of PoE power to a connected endpoint through the network cable. The port supports data transfer speeds of up to 1000 Mbit/s. This unit allows for the installation of PoE devices in locations where running dedicated Ethernet cabling is not feasible.
Housed in polycarbonate, the unit is designed for fixed, wall-mounted installations. It requires a UniFi system for setup and management. Blue LEDs indicate wireless signal strength, and a separate status LED shows the current operational mode. A physical button allows for manual factory resets. Measuring 130 mm in width and 55 mm in depth, the unit is small enough to be mounted behind peripheral equipment. The RJ45 port connects one Ethernet-based client device to the wireless network.
Key Features:- 866.7 Mbit/s maximum wireless data rate
- 2x2 MIMO 5 GHz radio
- IEEE 802.11a/n/ac networking standards
- 200 g weight
- White finish
- 34 mm height
Estimated delivery: 29.06
Today: Closed
Estimated delivery: 29.06
Today: Closed (Midsummer)
Estimated delivery: 29.06
Today: Closed
Estimated delivery: 29.06
Today: Closed
Estimated delivery: 29.06
Today: Closed (Midsummer Eve)
Estimated delivery time: 29.06
Estimated delivery time: 29.06
Estimated delivery time: 30.06
Estimated delivery time: 30.06
Estimated delivery time: 30.06
Estimated delivery time: 29.06
Estimated delivery time: 29.06
Estimated delivery time: 30.06
- manual pdf (English)


