FLASHFORGE PLA Pro, 1.75 mm, 1 kg 3D Printer Filament, Silver Gray

The FLASHFORGE PLA Pro 1.75 mm 1000 g Silver Gray 3D Printing Filament is a polylactic acid material for fused filament fabrication (FFF) printers. It is intended for detailed models, prototypes, and everyday parts rather than for any specialist application. The 1.75 mm format suits machines designed to accept that diameter. Its silver-gray colour provides a consistent finish across prints made from the same spool. The PLA-based material is described as having low shrinkage, which can help limit warping during printing.

Layer adhesion is described as good, and the filament is said to leave a smooth surface, both relevant to visible models and everyday parts. FLASHFORGE describes it as easy to use, though results depend on the printer and setup. The material is aimed at both new and experienced makers. Check that the printer supports PLA and follow its extrusion and build-plate temperature requirements. No brand-specific printer compatibility is stated, so the filament should not be assumed to suit every FFF machine.

• 1,000 g spool: provides a full kilogram of filament.
• 205 °C extrusion-temperature guideline: use as a reference when setting up a print.
• 25–60 °C build-plate temperature range: covers the stated bed-temperature guidance.
• ±0.03 mm diameter tolerance: specifies the stated variation in filament diameter.
• 73 MPa flexural strength: indicates the stated resistance to bending under load.
• 340.8 m stated filament length: gives an estimated length available on the spool.
• 1.22 g/cm³ specific gravity: provides a material-density reference.