Bosch GCM 10 GDJ Professional - jigsaw

This Bosch GCM 10 GDJ Professional corded compound mitre saw is built for accurate crosscuts, mitre cuts, and bevel cuts in timber-based materials. It is powered by a 2000 W motor from an AC mains supply and is intended for professional carpentry, workshop work, renovation, fitting, and installation. The saw handles hardwood, softwood, wood composite panels, MDF, beams, mouldings, and other timber components. Its cutting depth reaches 80 mm at both 90° and 45°, and the mitre adjustment range spans 47° left and right. Bosch's Axial-Glide system gives smooth, controlled head movement to help maintain cutting accuracy.

The saw ships with a 254 mm Expert for Wood blade with 60 teeth and a 30 mm bore, so it is ready to cut straight out of the box. At 31.6 kg, it is a stationary workshop tool rather than a portable one. Bevel settings allow cuts from 52° left to 60° right, giving plenty of range for angled joinery. A dust extraction port helps keep the workspace clear during longer cuts. Front-mounted angle controls keep mitre adjustments within easy reach from the operator's position.

• Cross-cut capacity of 80 x 306 mm – handles large timber sections in a single pass
• Bevel-cut capacity of 80 x 216 mm at 45° – supports angled cuts on substantial stock
• Mitre-cut capacity of 54 x 296 mm at 45° – accommodates wide angled crosscuts
• Idle speed up to 5,000 rpm – maintains cutting speed in dense hardwoods
• Sliding rails – extend the cutting range for wider boards and panels
• Table saw mode – adds flexibility for certain straight cuts
• Sound pressure level of 93 dB – hearing protection recommended during use