DJI Matrice 4D Series 240W Charging Hub

The DJI Matrice 4D Series 240W Charging Hub is a battery charging hub for DJI Matrice 4D and Matrice 4TD drone operations. Its 240 W rating defines the required charging setup for managing compatible intelligent flight batteries. Up to three batteries can be connected at the same time. Charging takes place sequentially rather than across all connected batteries simultaneously. The hub prioritises the battery with the highest existing charge level. This arrangement returns the most-charged battery to service first while the remaining packs wait their turn.

Two charging modes support different operating requirements between flights. Standard Mode charges each connected battery to 100% when maximum available charge is needed. Ready-to-Fly Mode stops at 90% to reduce preparation time before deployment. The hub accepts an input voltage of 16.8–25.5 V. Its specified operating temperature range is 5–40 °C. A compatible DJI 240 W Power Adapter is required, and a DJI Power 1000 portable power station can also be used when the appropriate connection is available.

• 200 g hub weight: limits the load added to transported charging equipment
• 305 × 103 × 41 mm form factor: provides clear measurements for storage planning
• SDC cable included: supplies the listed connection accessory
• One charging hub per pack
• 340 g packaged weight
• Batteries are not included and must be sourced separately