ANYCUBIC Water Washable Resin 2.0, 1 kg, Grey

ANYCUBIC Water Washable Resin 2.0 Grey 1 kg is intended for detailed resin 3D prints. Its water-washable formulation lets uncured resin be rinsed from prints with water, providing a water-based cleaning option during post-processing. The stated tensile strength is 38 MPa, indicating the measured resistance to pulling forces. Elongation at break is 16%, describing how far the material can stretch before breaking under test.

The resin is compatible with SLA, DLP and LCD resin printers, so printer technology is a key compatibility check before use. It is supplied in a bottle, rather than as filament for material-extrusion printers. The listed strength and elongation values describe different aspects of the cured material and may help when assessing suitability for a particular printed part. The data provided does not specify recommended exposure settings or curing conditions, so these settings should be checked against the printer and resin guidance.

• UV photopolymer resin: formulated for resin-based 3D printing.
• One bottle per pack: supplied as a single container.
• ANYCUBIC brand compatibility: identified for use with compatible ANYCUBIC equipment.
• Grey colour: gives printed parts a grey finish.
• Bottle format: the resin is packaged in a bottle.