KLEVV FIT V 32GB (2 x 16GB) DDR5 6000 MHz, CL30 Memory, White (EXPO, XMP)

The KLEVV FIT V 32 GB (2 × 16 GB) DDR5-6000 CL30 UDIMM Memory Kit – White is a matched desktop RAM kit for active system memory. Its two modules provide 32 GB of total capacity and transfer data at a rated 6000 MT/s. The DDR5 architecture and 288-pin DIMM format require a motherboard with compatible DDR5 UDIMM slots. The unbuffered modules are intended for PC and workstation systems rather than registered-memory platforms. Installed as a pair, the kit supports dual-channel operation on compatible Intel and AMD DDR5 platforms.

A CL30 CAS latency defines the primary access timing at the rated profile. Intel XMP 3.0 and AMD EXPO profiles provide preset configurations on platforms that support them. The profiled operating voltage is 1.35 V. Each stick uses an aluminium heat spreader for passive thermal management. At 33.2 mm tall, the low-profile modules provide clearance around large CPU coolers and in compact internal layouts. The heat spreaders have a white finish.

• 4800 MHz SPD profile: 40-40-40-77 timings at 1.1 V
• JEDEC standard support: provides a defined baseline memory configuration
• Rank value 2: specifies the module's internal memory arrangement
• 2048M x 64 module configuration: details the organisation of each stick
• 64-bit memory bus: standard data width for a non-ECC UDIMM
• SK Hynix A-Die memory chips: identifies the installed DRAM die type
• On-die ECC: internal chip-level correction is included; system-level ECC is not supported
• Integrated PMIC and thermal sensor: provides onboard power management and temperature monitoring