ELEGOO Mercury Plus V3.0 Wash and Cure Station

The ELEGOO Mercury Plus V3.0 Wash and Cure Station is a 2-in-1 post-processing unit designed for resin 3D prints. It combines the washing and curing stages into a single device, allowing users to remove uncured resin and harden finished surfaces without moving between machines. This accessory is explicitly compatible with the ELEGOO MARS series up to the MARS 5, as well as the SATURN, SATURN S, SATURN 8K, and SATURN 2 through 4 series. It also works with other LCD, DLP, and SLA resin 3D printers. Combining these steps offers a practical way to complete resin print post-processing.

The unit has a 7.5-litre cleaning capacity and supports both basket and hanging cleaning modes to suit different build platforms. Users control the washing and curing processes directly through an integrated touch panel. A UV-blocking cover shields the operator from direct exposure to the curing light and triggers an automatic safety shut-off if lifted during an active cycle. The casing combines white, orange, and transparent materials. The package includes one complete station for the post-processing workflow.

• 24 x 405 nm UV LEDs – deliver the specific wavelength required to cure standard resin prints
• 360-degree rotating turntable – ensures even light exposure across all surfaces of the model
• 30-minute maximum curing time – sets the upper limit for a single hardening cycle
• 250 mm maximum diameter – accommodates large resin prints up to the specified size
• 302.5 x 302.5 x 412.5 mm physical dimensions – defines the footprint needed on a workbench
• 4700 g total weight – provides stability during turntable rotation