ELEGOO ASA 1.75 mm, 1 kg 3D Printer Filament, Deep Black

The ELEGOO ASA Filament 1.75 mm Deep Black, 1 kg is an Acrylonitrile Styrene Acrylate material designed for Fused Filament Fabrication (FFF) 3D printers. It is formulated for functional parts and prototypes that need to withstand prolonged exposure to changing weather conditions. It has a dimensional accuracy of ±0.02 mm, which helps maintain consistent extrusion during printing. The spool weighs 1 kg and is vacuum-sealed with desiccant to limit moisture absorption during storage. A printer capable of reaching high extrusion temperatures is required to process this material effectively.

Printing this filament requires a nozzle temperature between 240 °C and 270 °C, with 255 °C recommended as a starting point. A heated build plate set to 90–100 °C is needed to ensure proper layer adhesion and reduce warping. The manufacturer recommends an ambient printing temperature of 45–60 °C and a relative humidity below 20% during operation for reliable results. The spool is compatible with Bambu Lab AMS systems, which simplifies automated multi-material printing workflows. Finished parts show a tensile strength of 35 MPa and a material density of 1090 kg/m³.

• Weatherproof rating: suitable for outdoor applications exposed to moisture and precipitation
• Ultraviolet protection: resists degradation and yellowing from direct sunlight
• Impact strength of 65.5 kJ/m²: absorbs energy to reduce part failure under sudden stress
• Flexural strength of 65 MPa and flexural modulus of 2349 MPa: maintains structural rigidity when bent
• Elongation at break of 10.6%: allows for slight deformation before fracturing
• Print speed up to 270 mm/sec: supports faster extrusion on capable hardware