ELEGOO Rapid PETG 1.75 mm, 1 kg 3D Printer Filament, Black

ELEGOO Rapid PETG Filament is a black 1.75 mm material intended for FDM and FFF 3D printers. It is engineered for high-speed printing, supporting extrusion rates up to 600 mm/s. As a PETG compound, it offers a balance of printability and mechanical durability for functional parts. The filament maintains a diameter tolerance of ±0.02 mm for consistent layer formation. Recommended printing parameters include a nozzle temperature of 240 °C and a build plate heated between 65 and 75 °C. Ambient relative humidity during operation should be kept at or below 20%.

The material has a flexural strength of 68 MPa and an impact strength of 67.6 kJ/m², allowing printed objects to withstand everyday impacts. An elongation at break of 8.9% indicates moderate flexibility before structural failure. This compound is suitable for applications requiring resistance to chemicals and environmental factors. The spool format works with standard FDM and FFF setups, including direct compatibility with Bambu Lab AMS systems. Users can tune print settings up to a maximum extruder tip temperature of 270 °C. It provides a practical option for prototyping and utility parts.

• Weighs 1 kg per spool for extended print sessions.
• Tensile strength rated at 42,000 kPa for structural integrity.
• Flexural modulus of 2097 MPa.
• Specific gravity of 1.29 g/cm³.
• Weatherproof material composition for outdoor applications.
• Integrated ultraviolet protection to prevent sun degradation.
• Easy to use for standard FFF workflows.