ELEGOO PLA Matte, 1.75 mm, 1 kg 3D Printer Filament, White

The ELEGOO PLA Matte Filament 1.75 mm Matte White 1 kg is a polylactic acid extrusion material supplied on a 1 kg cardboard spool. It produces a low-gloss, non-reflective surface that reduces the visibility of layer lines on printed objects. This matte finish gives a uniform appearance compared with standard glossy PLA alternatives. The filament measures 1.75 mm in diameter for use with standard FDM and FFF 3D printers. It is formulated for ease of use, making it suitable for both beginners and experienced makers. The material works well for general-purpose prints, including decorative models, prototypes, figures, and architectural parts.

Mechanical testing rates the filament with a tensile strength of 30,000 kPa and an impact strength of 29.3 kJ/m². It exhibits an elongation at break of 7.9 % and a specific gravity of 1.26 g/cm³. To preserve filament integrity during printing and storage, the operating environment should remain between 20 and 45 °C. Relative humidity must be kept at or below 20 % to prevent moisture absorption. The melting point is recorded at 163 °C. The cardboard spool provides a lightweight, recyclable packaging solution for the 1000 g of material.

• Diameter tolerance of ±0.02 mm for consistent feeding
• Print speed capability up to 250 mm/s
• Print temperature guideline of 210 °C
• Nozzle temperature range of 190–230 °C
• Build plate temperature range of 35–65 °C