ELEGOO ABS 1.75 mm, 1 kg 3D Printer Filament, Black

The ELEGOO ABS 3D Printer Filament, Black, 1.75 mm, 1 kg is a spool of acrylonitrile butadiene styrene (ABS) designed for FDM and fused filament fabrication (FFF) 3D printers. ABS is suited to functional parts, mechanical components, drone mounts, protective cases, and electronic housings that need greater toughness and heat resistance than general-purpose filaments. The recommended nozzle temperature is 240°C. An enclosed printer or build chamber is recommended to reduce warping and cracking during printing. The material is rated weatherproof, retaining structural integrity in damp and cold conditions. Printed parts withstand heat up to approximately 85°C.

Mechanical testing reports a flexural strength of 68 MPa, a flexural modulus of 2484 MPa, and an impact strength of 54.9 kJ/m², indicating a rigid material suited to load-bearing and structural applications. A build plate temperature of 90–100°C is specified for proper first-layer adhesion. Filament should be stored and printed in a low-humidity environment, preferably below 20% relative humidity, to preserve quality. Print settings should be adjusted based on the specific printer enclosure and ambient conditions. The material extrudes consistently when processed within the recommended temperature range.

• 1.75 mm filament diameter for FDM/FFF printer compatibility
• 1 kg spool in black
• Nozzle temperature range of 240–280°C
• Tensile strength of 35 MPa with 7.2% elongation at break
• Specific gravity of 1.05 g/cm³
• Minimum melting point of 216°C