SUNLU Classic SO PLA 1.75 mm, 1 kg 3D Printer Filament, Sunny Orange

The SUNLU PLA Classic SO PLA Filament is a 1 kg spool of Sunny Orange material. Its matte finish helps reduce the visibility of layer reflections on printed surfaces. The material supports print speeds of up to 450 mm/s, depending on the printer, nozzle, model geometry, and cooling setup. It is designed for straightforward printing and suits users producing general-purpose prototypes or decorative models. The filament is suitable for standard desktop extrusion systems.

Nozzle temperatures should be set between 200 °C and 260 °C, with a build plate temperature of 50 °C to 60 °C for reliable adhesion. The filament is fully compatible with Bambu Lab AMS setups. It has a specific gravity of 1.36 g/cm³. Printed objects will exhibit a flexural strength of 50 MPa, an impact strength of 8 kJ/m², and a tensile strength of 27,000 kPa. The elongation at break is 20 percent, indicating how the printed parts respond to physical stress.

• Print technology: Fused Filament Fabrication (FFF) and FDM compatible.
• Nominal diameter: 1.75 mm.
• Diameter tolerance: ±0.02 mm for consistent extrusion.
• Spool dimensions: 200 × 75 × 200 mm.
• Total package weight: 1,370 g.
• Quantity per pack: 1 piece.