ANYCUBIC ASA 1.75 mm, 1 kg 3D Printer Filament, Black

The ANYCUBIC ASA Filament, 1.75 mm, Black, 1 kg is an ASA material for FDM 3D printing. It is intended for functional parts, including components used in conditions involving exposure to the elements. The 1.75 mm filament size is compatible with FDM printers that support that diameter. The 1 kg spool contains black filament for printing multiple parts or larger jobs. Its listed tensile strength is 41,000 kPa, which measures how the material resists pulling forces. This figure can help when comparing materials for parts that will experience mechanical loads, though it does not by itself determine a part's suitability.

The manufacturer's recommended nozzle temperature is 265 °C, with a build plate range of 80–100 °C. A print speed of 75 mm/s is also listed. These settings provide a reference point for configuring a compatible printer. The material's flexural properties are relevant to parts that may bend under load, while elongation at break indicates how much it can stretch before breaking. The figures are material specifications; the performance of a printed part also depends on its design and print conditions. Check that the printer supports ASA and the stated filament diameter before use.

• Tensile modulus: 2,220 MPa, indicating stiffness under tensile load.
• Flexural modulus: 1,845 MPa, describing stiffness during bending.
• Flexural strength: 62 MPa, the listed strength under bending load.
• Elongation at break: 15%.
• Specific gravity: 1.07 g/cm³.