No price development information for this product.
Optoma W305ST - DLP-projektori - 3D - 3200 ANSI lumenia - WXGA (1280 x 800) - 16:10 - HD 720p
This product is end of life or currently not available.
Display | |
Built-in display | ![]() |
Ports & interfaces | |
USB connector type | USB Type-B |
USB 2.0 ports quantity | 1 |
Headphone outputs | 1 |
Microphone in | ![]() |
DVI port | ![]() |
VGA (D-Sub) ports quantity | 3 |
S-Video inputs quantity | 1 |
Composite video in | 1 |
RS-232 ports | 1 |
AC (power) in | ![]() |
HDMI ports quantity | 1 |
Lens system | |
Offset | 115% |
Throw ratio | 0.52:1 |
Weight & dimensions | |
Weight | 2.55 kg |
Height | 86 mm |
Width | 288 mm |
Depth | 220 mm |
Energy management | |
Power consumption (typical) | 235 W |
Power source | AC |
Power consumption (standby) | 0.5 W |
AC input frequency | 50 - 60 Hz |
AC input voltage | 100 - 240 V |
Operational conditions | |
Operating temperature (T-T) | 5 - 40 °C |
Networking | |
Ethernet LAN | ![]() |
Wi-Fi | ![]() |
Projector | |
Projection distance | 0.5 - 2.5 m |
Projection technology | DLP |
Projector brightness | 3200 ANSI lumens |
Zoom ratio | Fixed |
Screen size compatibility | 1133.9 - 5669.5 mm (44.6 - 223.2") |
Keystone correction, vertical | ±40° |
Contrast ratio (dynamic) | 15000:1 |
Matrix size | 1.65 cm (0.65") |
Native aspect ratio | 16:10 |
Supported aspect ratios | 4:3, 16:9, 16:10 |
Projector native resolution | WXGA (1280x800) |
Number of colours | 1.073 billion colours |
Video | |
Analog signal format system | NTSC,NTSC 3.58,NTSC 4.43,NTSC M,PAL,PAL B,PAL D,PAL G,PAL H,PAL I,PAL L,PAL M,PAL N,SECAM,SECAM B,SECAM D,SECAM G,SECAM K,SECAM K1,SECAM L |
Full HD | ![]() |
HD-Ready | ![]() |
Supported graphics resolutions | 1280 x 800,1600 x 1200 (UXGA) |
Supported video modes | 1080i,480i,480p,576i,576p,720p |
3D | ![]() |
Storage | |
Card reader integrated | ![]() |
Lamps | |
Service life of lamp | 4500 h |
Service life of lamp (economic mode) | 6000 h |
Certificates | |
RoHS compliance | ![]() |
Packaging content | |
Remote control included | ![]() |
Manual | ![]() |
Design | |
Cable lock slot | ![]() |
Product colour | White |
Ceiling mounting supported | ![]() |
Product type | Desktop projector |
Cable lock slot type | Kensington |
Performance | |
Horizontal scan range | 15 - 91 kHz |
Vertical scan range | 25 - 85 Hz |
Noise level | 29 dB |
HDCP | ![]() |
Preset modes | Cinema, Custom, Dynamic, Presentation |
Multimedia | |
RMS rated power | 2 W |
Built-in speaker(s) | ![]() |
EAN | 5060059047567 |
Warranty | 2 years |
Source: Icecat.biz |
3D projection in the smallest of rooms with the X306ST
- Native WXGA, 60” image from just 68cm away;
- Bright images, vivid colours – 3200 ANSI Lumens;
- Up to 10,000 hours² lamp life and 70% energy saving;
- Shadow-free images on interactive whiteboards.
Widescreen 3D projection in the smallest of rooms with the W305ST
The WXGA short throw, Full 3D W305ST at 3200 ANSI Lumens is designed to display bright, rich, colourful,crystal-clear images for both the education and business environments.
Captivate your audience, increase their learning potential and help improve results with lessons in crystal clear 2D or incredible 3D.
Perfect for installations with interactive whiteboards ensures teaching and business environments have the right tools for engaging and presenting to their audience without shadows and screen glare.
Incredible lamp life of up to 10000 hours combined with Eco+ technology provides energy and money saving features.
Colour Guarantee
We are so confident that the image colour quality of our projectors will remain as good as the day you bought it that Optoma will guarantee it for five years.
Inspire Your Students
Teaching in 3D is the latest innovation in education technology, opening up new avenues of learning for both educators and students alike. Engage and inspire your students with lessons taught in 3D – explore the world, travel through space, see inside the body and bring new ideas to life. Optoma 3D projectors take teaching to a whole new level of immersion and enjoyment… at no extra cost!
How does 3D work?
Using the inherent speed of DLP technology, Optoma 3D Ready projectors can output video and images at an astonishing rate of 120Hz, allowing you to show full screen, full colour, stereoscopic 3D.
The 3D effect is generated by splitting this signal into two standard video streams, one for each eye. Using DLP Link technology, the 3D glasses synchronise with the image on screen to filter each stream to the correct eye. Your brain then combines the two streams to make them jump into life.
The W305ST supports multiple 3D formats from various devices such as PC, Blu-ray 3D, Sony PS3, Microsoft Xbox 360 or 3D TV broadcast system.
Short Throw Lens
The W305ST can project an impressive 60” diagonal image from just 68cm from the screen. Standalone or wall mounted, the W305ST eliminates shadows on the screen and allows you to present with ease.
Bright, Detailed and Colourful Projection
Grab your audience’s attention with bright, vivid projected images thanks to the BrilliantColor technology incorporated within the W305ST.
Preset display modes allow you to achieve a perfect image on a variety of surfaces including screens and interactive whiteboards.
Clear, Focused Images
Lessons in the classroom and presentations in the boardroom demand sharp, flawless images. DarkChip3 technology from Texas Instruments produces a stunning 15000:1 contrast ratio for pin sharp graphics and Crystal-clear text. Crisper whites & ultra-rich blacks make images come alive and text easier to read.
To retain image clarity, Optoma projectors are designed with DLP technology preventing degradation over time to give consistent pixel performance.
RS232 Control
The extensive RS232 command set makes it simple and easy to control the W305ST with any RS232 control system.
AMX Compatibility
Dynamic Discovery Protocol is incorporated into the W305ST. This feature allows for easy installation with AMX control systems.
Extra Features
Direct power on - start up time is significantly reduced as standby mode is bypassed when the power cable is inserted into an active power outlet. This eliminates the need to use the ‘Power’ button on the remote control or the projector keypad.
Auto power off - if after a pre-determined time the projector does not receive a signal, it will turn itself off automatically, conserving power and extending the life of the lamp.
Keypad lock - once enabled, prevents unauthorised adjustments ensuring the projector can only be controlled via the remote control.
Estimated delivery: No delivery info
Today: 10:00 - 18:00
Estimated delivery: No delivery info
Today: 09:00 - 17:00
Estimated delivery: No delivery info
Today: 10:00 - 17:00
Estimated delivery: No delivery info
Today: 10:00 - 18:00
Estimated delivery: No delivery info
Today: 10:00 - 17:00