SilentiumPC Astrum AT6V EVO TG ARGB Pure Black

Astrum Mesh front
In addition to the extremely attractive form, the Astrum Mesh front prevents the dirt from getting inside your computer, as it is integrated with a dust filter. The whole structure is held by special hooks at the bottom, and stays in its position thanks to magnets. The user can easily remove it at any time, e.g. to clean the filter.

Edge lit glass side panel
The edge illumination of the side panel is a part of the extensive addressable LED lighting system. An additional LED strip draws a colorful glow on the edges of the glass, creating a unique aura around the components installed inside the PC.

Astrum AT6V Evo TG ARGB in a nutshell: fascinating design, extensive addressable LED illumination system (four ARGB fans, edge lit tempered glass panel, advanced PWM & LED controller), spacious Natissis structure, USB type C and a smooth paint coating. What distuinguishes the chassis from other cases available in this segment are great ventilation, a very functional interior, rich set of equipment as well as functionality, such as the easily removable Astrum Mesh front with a dust filter.

Full set od dust filters
A set of three standard dust filters: at the front (easily detachable Astrum Mesh), at the top and under the PSU (all are magnetic), helps to keep the interior of Astrum AT6V Evo TG ARGB and installed components clean. The users can install up to eight 120 mm fans inside the chassis.

Addressable LED lighting
Astrum AT6V Evo TG ARGB is equipped with an ARGB LED illumination system in the form of: four Stella HP ARGB CF 120 mm fans, advanced Aurora Sync Evo PWM ARGB controller, as well as – brand new - edge lit tempered glass side panel.

Efficient cooling system
The Astrum AT6V Evo TG ARGB chassis is equipped with numerous and extensive vents as well as outstandingly airy Astrum Mesh front panel. Thanks to this, the four high pressure fans – Stella HP ARGB CF 120 mm – provide great amounts of air flow, which translates into very low temperatures of components installed inside.

Advanced Aurora Sync Evo PWM ARGB controller
The chassis is equipped with an advanced Aurora Sync Evo PWM ARGB controller, which allows to connect up to 6 fans to one FAN PWM output on the motherboard and – in this way - control their rotational speed depending on the CPU temperature or manually by the user. The PWM control is available even when 3-pin (non-PWM) fans are connected. Additionally, up to 6 ARGB devices are supported so you can control their lighting.

I/O control panel with USB type C
The well-equipped front I/O panel consists of: 1 × USB 3.2 gen 2 type C, 2 × USB 3.2 Gen 1 type A, audio ports (microphone and headphones), dedicated switch to control the addressable LED lighting, as well as POWER and RESET buttons.

Natissis structure
The SilentiumPC Astrum AT6V Evo TG ARGB chassis utilizes a 391 mm long Natissis structure designed in Poland. The creators’ goal was to maximize space utilization within the standard size MIDI Tower constructions for ATX and E-ATX formats. The interior will fit graphics cards up to 360 mm long, and the CPU air cooling kits can have a maximum height of 162 mm. The most distinctive element of this segment is undoubtedly the possibility of installing radiators for integrated liquid cooling systems (AIO) not only at the front (120/140/240/280/360 mm), but also at the top of the case: 120/140/240/280 mm! Alternatively, the user can install up to 8 fans inside the chassis.

Broad AIO LC compatibility
The Astrum AT6V Evo TG ARGB chassis fits integrated liquid cooling systems (AIO). Their radiators can be: 120/140/240/280/360 (at the front), 120/140/240/280 (suspended under the top) or 120 mm (at the rear) long.

Cable arrangement system
At the rear of the Natissis structure, on which the Astrum AT6V Evo TG ARGB is based, there is a space behind the motherboard tray max. 29 mm deep with numerous – 24 pieces – cable tie hooks for better and more aesthetic cable management. It also has its own vents.