Key Specifications
Choose one or multiple features to search for items that have the same specifications.| Ports & interfaces | |
| Ethernet LAN (RJ-45) ports | 24 |
| SFP/SFP+ slots quantity | 4 |
| Gigabit Ethernet (copper) ports quantity | 24 |
| Fiber ports quantity | 4 |
| Console port | RJ-45/USB Type-C |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 24 |
| SFP+ module slots quantity | 4 |
| Weight & dimensions | |
| Weight | 3.68 kg |
| Height | 43.9 mm |
| Width | 298.7 mm |
| Depth | 444.5 mm |
| Energy management | |
| Power consumption (typical) | 31.8 W |
| Power source | AC |
| AC input frequency | 50/60 Hz |
| AC input voltage | 100 - 220 V |
| Power plug type | Type C |
| Operational conditions | |
| Operating relative humidity (H-H) | 10 - 90% |
| Storage temperature (T-T) | -25 - 70 °C |
| Operating temperature (T-T) | -5 - 50 °C |
| Storage relative humidity (H-H) | 10 - 90% |
| Heat dissipation | 804.1 BTU/h |
| Protocols | |
| GARP VLAN Registration Protocol (GVRP) | ![]() |
| IPv4 & IPv6 features | ICMPv6, IPv6 SNMP, IPv6 SSH, IPv6 TFTP, IPv6 Telnet |
| Networking | |
| Networking standards | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3an, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Port mirroring | ![]() |
| Link aggregation | ![]() |
| Broadcast storm control | ![]() |
| Rate limiting | ![]() |
| DHCP client | ![]() |
| IP routing | ![]() |
| Spanning tree protocol | ![]() |
| Head-of-line (HOL) blocking | ![]() |
| VLAN support | ![]() |
| 10G support | ![]() |
| Ethernet interface type | Gigabit Ethernet |
| Copper ethernet cabling technology | Cat5e |
| Cable types supported | Cat5e |
| QinQ implementation | Selective QinQ |
![]() | |
| Virtual LAN features | Private VLAN, Voice VLAN |
| Data transmission | |
| MAC address table | 16000 entries |
| Switching capacity | 128 Gbit/s |
| Jumbo frames support | ![]() |
| Number of queues | 8 |
| Packet buffer memory | 1.5 MB |
| Number of static routes | 990 |
| Jumbo frames | 9000 |
| Static route | ![]() |
| Packaging data | |
| Package weight | 5.99 kg |
| Package depth | 575.1 mm |
| Package height | 105.9 mm |
| Package width | 430 mm |
| Security | |
| Security algorithms | HTTPS, SNMP, SNMPv2, SNMPv3, SSH, SSH-2 |
| Access Control List (ACL) | ![]() |
| SSH/SSL support | ![]() |
| IGMP snooping | ![]() |
| DoS attack prevention | ![]() |
| Authentication type | RADIUS, TACACS+ |
| Authentication | MAC-based authentication, Web-based authentication |
| Access Control List (ACL) rules | 1024 |
| Queue scheduling algorithms | Weighted Round Robin (WRR) |
| IGMP proxy | ![]() |
| DHCP features | DHCP auto-config, DHCP client, DHCP relay, DHCP server, DHCP snooping |
| Certificates | |
| Certification | UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A |
| Management features | |
| MIB support | Y |
| Switch layer | L2/L3 |
| Quality of Service (QoS) support | ![]() |
| Web-based management | ![]() |
| Switch type | Managed |
| Configuring Location Settings (CLI) | ![]() |
| Other features | |
| Bandwidth | 128 Gbit/s |
| Packaging content | Switch, power cable, USB Type C cable and mounting hardware |
| Design | |
| Rack mounting | ![]() |
| Product colour | Grey |
| Reset button | ![]() |
| Number of fans | 1 fan(s) |
| Power over Ethernet (PoE) | |
| Power over Ethernet (PoE) | ![]() |
| Power over Ethernet (PoE) ports quantity | 24 |
| Total Power over Ethernet (PoE) budget | 195 W |
| Performance | |
| Processor frequency | 1.4 MHz |
| Internal memory | 1000 MB |
| Mean time between failures (MTBF) | 698220 h |
| Flash memory | 512 MB |
| Memory type | DDR4-SDRAM |
| Plug and Play | ![]() |
| Built-in processor | ![]() |
| Logistics data | |
| Country of origin | China |
| Multicast features | |
| Multicast support | ![]() |
| EAN | 0889728521529 |
| Warranty | 3 months |
The Cisco Catalyst 1300 24p GE PoE 4x10G SFP+ Managed Switch is a Layer 2/Layer 3 device for wired endpoint connections. It features 24 Gigabit Ethernet RJ-45 ports for access-layer traffic and four dedicated SFP slots for 10G uplinks. The hardware provides a 128 Gbit/s switching capacity. Integrated IP routing capabilities allow the unit to process inter-VLAN communication, supporting simultaneous device traffic and high-speed aggregation to core servers.
This rack-mountable PoE switch fits into standard equipment cabinets. It supplies Power over Ethernet across all 24 copper ports with a 195 W total budget for connected access points and network cameras. Administrators can configure the device via a web-based interface or a command-line interface accessible through the RJ-45/USB Type-C console port. The operating system supports Private and Voice VLANs, Quality of Service (QoS) prioritization, and DHCP snooping. Under typical loads, the device consumes 31.8 W of power and uses a single-fan cooling system.
Key Features:- Access Control List (ACL) support for up to 1,024 rules.
- Supports up to 990 static routes for internal traffic routing without an external gateway.
- MAC address table capacity of 16,000 entries.
- Includes 1 GB of DDR4-SDRAM and a 1.5 MB packet buffer.
- Mean Time Between Failures (MTBF) of 698,220 hours.
Estimated delivery: 29.07 - 31.07
Today: 10:00 - 18:00
Estimated delivery: 29.07 - 31.07
Today: 09:00 - 17:00
Estimated delivery: 29.07 - 31.07
Today: 10:00 - 17:00
Estimated delivery: 29.07 - 31.07
Today: 10:00 - 18:00
Estimated delivery: 29.07 - 31.07
Today: 10:00 - 17:00
Estimated delivery time: 29.07 - 31.07
Estimated delivery time: 29.07 - 30.07
Estimated delivery time: 30.07 - 31.07
Estimated delivery time: 30.07 - 31.07
Estimated delivery time: 30.07
Estimated delivery time: 29.07 - 31.07
Estimated delivery time: 29.07 - 31.07
Estimated delivery time: 30.07
- leaflet (English)

