Einhell GE-SP 4390 N-A LL ECO Clear Water Submersible Pump, 430 W, 9000 l/h

The Einhell GE-SP 4390 N-A LL ECO clear-water submersible pump is designed for draining and emptying clean-water areas. This AC-powered unit runs on a standard mains electricity supply to drive its internal motor. Operating at 430 watts, the pump provides practical output for residential or domestic water transfer tasks. It delivers a rated flow rate of up to 9,000 litres per hour with a maximum delivery head of 8 metres. These figures allow the pump to handle flooded basements, pools, or holding tanks efficiently. The internal mechanics are configured for clear-water duty rather than processing sludge or heavy sewage.

Construction of this submersible pump incorporates an impact-resistant plastic core surrounded by a stainless steel outer shell. A 10-metre H05RN-F power cable gives reasonable reach for placement away from the nearest electrical outlet. The unit supports a maximum immersion depth of 7 metres, making it suitable for deep water reservoirs. Moving the 4.9 kg pump between locations is straightforward thanks to an integrated carrying handle at the top. Both indoor and outdoor use are fully supported, giving flexibility across different environmental conditions. Initial extraction setups can also accommodate a maximum suction height of 1 metre.

• Maximum particle size of 1 mm – limits internal wear but requires use strictly in clear-water environments.
• Aqua Sensor system – enables automatic starting at three adjustable water depths or continuous running for unmonitored pumping.
• Near-dry pumping capability – draws residual water down to approximately 1 mm, reducing the need for manual cleanup.
• Maximum operating pressure of 0.8 bar – provides steady output for routine domestic drainage tasks.
• Maximum input water temperature of 35 °C – suitable for draining lukewarm environments such as heated swimming pools or sun-exposed tanks.
• G1 1/2 connecting thread with universal adapter – simplifies attachment to a wide range of standard hose sizes.
• Integrated non-return valve – prevents drained water from flowing back into the source once the motor stops.