Einhell GE-DP 7935 N-A ECO Submersible Dirty Water Pump, 790 W, 19000 l/h, 9 m, 35 mm

The Einhell GE-DP 7935 N-A ECO Submersible Dirty Water Pump is designed for removing contaminated water from flooded basements, construction pits, and ponds. It runs on mains electricity and uses a 790 W motor to drive the pumping mechanism. It delivers a maximum flow rate of 19,000 l/h at a 9 m delivery head, which is sufficient turnover for large-scale domestic water removal. Fluid movement is further supported by a maximum operating pressure of 0.9 bar.

The pump has a plastic body with a stainless steel outer shell, balancing structural integrity and corrosion resistance. Weighing 6,210 g, it incorporates a carrying handle for transport between work sites. Connection to existing pipework is via a G1 1/2 male thread (47.8 mm). A universal flexible connector is also included, offering setup options for different hose configurations. The supplied 10 m H07RN-F power cable provides adequate reach without requiring an extension lead. The hardware is certified for both indoor and outdoor use.

• Maximum solid particle size of 35 mm – clears suspended dirt and small stones without blocking the intake.
• IPX8 waterproof rating – remains safely sealed during continuous, full submersion.
• Maximum immersion depth of 7 m – reaches the bottom of standard drainage shafts and deep water features.
• Maximum input water temperature of 35 °C – safely processes warm discharge from household appliances or sun-heated ponds.
• Integrated overload protection – shuts down the motor automatically to prevent thermal damage during heavy operation.
• Adjustable float switch – enables automatic activation based on specific water levels to prevent dry running.