Kärcher SP 6 Flat Inox - submersible pump for clear water

The powerful clear water submersible pump from Kärcher pumping up to 14000 liters from clear to slightly polluted water per hour and is therefore perfect for pools, drainage wells and water damage in the house and in the basement. In case of more soiled water dirt the use of the enclosed stainless steel pre-filter is recommended to protect the pumps impeller. The robust stainless steel housing and the mechanical seal make the pump particularly durable. Optionally, the warranty to 5 years extension. The flat picking submersible pump is equipped with a continuously variable level sensor which starts the pump in contact with water immediately. In addition, the SP has 6 Flat Inox foldable feet, so that the submersible pump already starts at a water level of 7 millimeters. The switch makes the pump in manual mode can be set to continuous operation. Both in continuous operation as well as in the automatic mode to pump up to 1 mm residual water level wipe dry off, depending on how the level sensor is set. In addition, the Quick Connect connector socket enables a very quick and easy hookup of 1 "- 1 1/4" - 1 and 1/2 "-hoses.

Standard accessories
1 x Connection piece (for G1 1/2-thread)
1 x Connection piece (for 1", 1 1/4" or 1 1/2 hose connection) including non-return valve

Technical Data

• Flow rate, max. (l/h) 14000
• Flow height, max. (m) 9.0
• Pressure, max. (bar) 0.9
• Grain size of dirt particles that can be transported max. (mm) 5
• Motor rating, max. (W) 500
• Delivery temperature, max. (° C) 35
• Connection thread G1 1/2
• Power cable (m) 10
• Switch on/off height (cm) 5,5-24
• Switch on/off height without pre-filter (cm) 1-18,5
• Minimum fluid height (manual mode) (mm) 7
• Residual fluid height (mm) 1
• Frequency (Hz) 230-240
• Voltage (V) 50
• Weight without accessories (kg) 6.7
• Dimensions incl. accessories (L x B x H) (mm) 238 x 287 x 356